Alpine DVA-5205P RPT Button → P19, Power Button → P10, DVD/AUDIO Switch → P8, Title Button → P12

Functions of remote control unit buttons

9RPT Button (→ P19)

Repeat playback.

pPOWER Button (→ P10)

Turns the power ON and OFF. NTSC/PAL Button (→ P11)

Press and hold for 5 seconds to change between NTSC and PAL.

qDVD/AUDIO Switch (→ P8)

Used to switch between DVD and Audio operation.

wGO TO Button (→ P16, 17, 18)

Used to go directly to start of selec- tion.

TITLE Button (→ P12, 21)

Press and hold for 2 seconds to display the Title Menu.

eRTN Button (→ P16, 17, 18, 25, 27, 29, 31, 33, 35, 37, 39, 41, 43, 44, 45, 46, 47, 49, 50, 51, 53, 55)

Used to return the selection screen just prior to the present screen. V.OUT Button (→ P23)

Used to switch between Video and Audio output to the rear monitor.

r.. / ..: Button (→ P15)

Used for Pause and Frame-by-Frame playback.

t■ Button (→ P13) Used to stop playback.

yA.PROC Button (→ P40, 41, 43, 44, 45, 47, 49, 50, 51, 53, 55)

Used to summon the processor control screen when connected with the Digital Audio Processor.

uSUB T. Button (→ P20)

Press and hold for 2 seconds to change the subtitles.

i–ON/OFF Button →( P21)

Press and hold for 2 seconds to turn the subtitles ON and OFF.

oANGLE Button (→ P20)

Press and hold for 2 seconds to change the angle.

;CLR Button (→ P16, 17, 18, 27)

Remove numbers (one character at a time) that have been selected and input.

Press and hold for 2 seconds. All the characters which were selected and input are erased.

aAUDIO Button (→ P19)

Press and hold for 2 seconds to change the audio output.

s10-Key Pad (→ P11, 13, 16, 17, 18, 21, 25, 27, 28)

Used to input numbers.

Note: Operation may not be accepted depending on the type of disc and the playback conditions. At such a time the following mark is displayed on the screen:

BAND Button (→ P41, 52)

Press and hold for 2 seconds to switch the menu screen when controlling the Digital Audio Processor.

69