Alpine TDM-7580R CD Changer Operation, Music Sensor M.S. Skip, Fast Forward and Backward

Page 15

CD Changer Operation

SOURCE

Preset buttons

DN g -/Jf UP

Controlling CD Changer (Optional)

 

Music Sensor (M.S.) Skip

If an optional Alpine 6-disc CD Changer (M-Bus) is connected to the 8-pin DIN connector of the TDM-7583R/TDM-7581R/TDM-7580R you can control the CD Changer using the TDM-7583R/ TDM-7581R/TDM-7580R.

NOTE

The CD controls on the TDM-7583R/TDM-7581R/TDM- 7580R for the CD operation are functional only when the CD Changer is interconnected with the TDM-7583R/ TDM-7581R/TDM-7580R.

1 Press the SOURCE button to activate the CD Changer.

The display shows the disc number and track number.

2 Make sure that the Function indicator illuminates, then press the Preset buttons to select the desired disc loaded in the CD Changer.

3 To pause playback, press the -/Jbutton. Pressing the -/Jbutton again will resume playback.

NOTES

•If the "F" indicator is illuminated the Disc Select buttons become nonfunctional.

•Press the SOURCE button to activate the CHANGER mode.

•Only compact discs containing the mark shown can be used.

•We cannot fully guarantee the playback of CD-R (CD- Recordable). You cannot playback CD-RW (CD- ReWritable) on this unit.

1 Press the DN g button once to return to the beginning of the current track.

If you wish to return to the beginning of a track further back, repeatedly press until you reach the desired track.

Press the f UP button once to advance to the beginning of the next track.

If you wish to advance to a track further ahead, press repeatedly until the desired track is reached.

NOTE

The music sensor feature is functional in the play or pause mode.

Fast Forward and Backward

1 Press and hold the DN g or f UP button to quickly move backward or forward respectively until you reach the desired portion.

NOTE

This feature works only in the CD playback mode.

13-EN

Page 14 Page 16
Image 15
Page 14 Page 16
Contents TDM-7583R TDM-7581R TDM-7580R Alpine CD Changers Give You More Contents Precautions Handling the Detachable Front Panel Initial System Start-Up Connectable to Remote Control Interface BoxBasic Operation Detaching the Front PanelTurning Loudness On/Off Turning Power On and OffAdjusting Source Signal Levels Non Fading Pre-out N.F.P. On and Off TDM-7583R onlyRadio Operation Manual TuningAutomatic Seek Tuning Manual Storing of Station PresetsTuning to Preset Stations Automatic Memory of Station PresetsRDS Operation Setting RDS Reception Mode and Receiving RDS StationsRecalling Preset RDS Stations When the RDS station signal received has become weakReceiving Traffic Information While Playing Tape or Radio PTY Programme Type TuningWhen traffic information stations cannot be received Receiving Traffic InformationReceiving RDS Regional Local Stations Priority NewsNormal Play and Pause Cassette Player OperationInserting/Ejecting Cassette Repeat PlayFast Forward and Rewind Programme Sensor P.S Scanning ProgrammesManual Reverse CD Changer Operation Music Sensor M.S. SkipFast Forward and Backward Repeat Play on Single Track or Entire Disc X. Random PlayDisc Scan Erasing Disc Title TDM-7583R only Titling Discs TDM-7583R onlyRemote Control Operation Source Button Battery ReplacementCase of Difficulty InformationTDM-7583R only SpecificationsPrecautions Installation and ConnectionsRemoval InstallationSpeakers ConnectionsAntenna Receptacle Power Antenna Lead BlueISO Power Supply Connector Ground Lead Black Remote Control Interface Connector TDM-7583R only
Top Page Image Contents