AV RCA Connector Video, Audio R, Audio L

WIRING/CONNECTIONS

AV RCA Connector (Video, Audio R, Audio L)

Mini-DIN to RCA Interface

These RCA-type connectors connect to any video source. This connector is used as an A/V input for the TMX-R680A, however it may also be used as an output for other units.

IGN/ACC (Red)

This wire connects to the ignition or accessory line of the vehicle. This triggers main power to turn the unit on. Although both DIN cables have this wire, only one of them should be connected to the IGN/ ACC line. In the delayed dome light mode, it is used for turning the dome light OFF when the ignition is ON.

GND (Black)

This is the shield GND. It should connect to the vehicle’s chassis for reducing any noise.

IR Remote Out (White/Brown)

The Remote Out wire connects to any ALPINE Mobile Video product which has an external remote input function. For example, products such as a DVD, VCR and TV Tuner.

External AV Select (Pink/Blue)

External AV Select forces the TMX-R680A to switch to the A/V input sending the AV Select trigger.

This trigger is a pulsed signal (Active Low, 500ms or more). If this input is remains low, switching to other sources is not possible (Switching sources using the Remote Control is still possible). This is useful if you don’t want an AV source to be interrupted. Playing a video is a good example of this scenario. This function is mainly used for connecting with other ALPINE products.