Alpine TMX-R680A owner manual Right Side View

Page 11

WIRING/CONNECTIONS

Right Side View

Power Supply Connector

Dome Light-Always OFF (Grey/Green

Dome Light-Always ON (Red/Green)

Dome Light-Door (Blue/Green)

Remote Turn-On (Blue/White - +12V Output)

Ground Lead (Black)

Ground Lead (Black)

Dome Light Battery Lead (Yellow/Green)

Battery Lead (Yellow)

1

2

3

Dome Light Rocker switch is located on Alpine overhead console

Cable Color

Dome Override (Always OFF)

........................................................................Grey/Green

Dome Override (Always ON)

Red/Green

Dome Light (Door Trigger)

Blue/Green

Remote Turn ON

Blue/White

GND: Main Unit, Dome Light

Black

BATT (Dome Light)

Yellow/Green

BATT (Main Unit)

Yellow

Dome Override (Always OFF)

Connecting to Pin #1 of the external dome light SW. When it is grounded, the Dome light remains off all the time.

Dome Override (Always ON)

Connect to Pin #3 of the external dome light SW. When it is grounded, the Dome light remains on all the time.

Dome Light (Door Trigger)

Connect to the factory door switch.

NOTE : Vehicle Door polarity depends on the vehicle type can be changed by the jumper SW where is located on the left side PCB in the overhead monitor. (Default: Negative Switched System)

Positive Switched System

+12V GND

Negative Switched System

GND +12V

11

Image 11
Contents TMX-R680A Page Make the Correct Connections FEATURES/DESCRIPTION Operation Overhead Monitor Additional Dome Light Feature Operation Dome Light/Remote ControlDome Light PowerSetup Mute Volume Source 5m Mini-DIN Extension Cable AV-1 Mini DIN-ConnectorAV-2 Mini-DIN Connector IR Remote Out White/Brown AV RCA Connector Video, Audio R, Audio LIGN/ACC Red GND BlackRight Side View GND Specifications Typical Rear Seat Entertainment System Page Alpine ELECTRONICS, INC