Alpine CDA-7876RB, CDA-7873R Recalling Preset RDS Stations, Receiving RDS Regional Local Stations

Page 20

RDS

TUNE

T.INFO

Preset buttons (1 through 6)

g DN

f UP

SETUP/F AFPTY

RDS Operation

Recalling Preset RDS Stations

1 Press the "F" button. The indicator will illuminate.

2 Press the AF button to activate the RDS mode. The display shows "AF" when the RDS mode is activated.

3 Press the 1 through 6 buttons in which your desired RDS station is preset. If the preset station's signal is weak, the unit automatically searches and tunes to a stronger station in the AF (Alternative Frequencies) list.

4 If the preset station and the stations in the AF list cannot be received:

The unit searches again for a station in the PI (Programme Identification) list.

If there are still no stations receivable in the area, the unit displays the frequency of the preset station and the preset indicator disappears.

If the signal level of the Regional (Local) station being tuned becomes too weak to receive, press the same preset location button to tune in a Regional station in other district.

NOTE

For presetting the RDS stations, refer to the Radio Operation section. The RDS stations can be preset in the FM1, FM2 and FM3 bands only.

Receiving RDS Regional (Local) Stations

1 Press and hold the SETUP button for at least 3 seconds to activate the setting mode.

2 Press the f UP button repeatedly to select "REG" Each press of the f UP button scrolls the modes as shown:

→FM-LV → REG → PTY31 → HI-FI/NORMAL/STABLE → AMBER∗

DEMO ← AUX ← SCR ← MUTE ← BEEP ← SUB ← DIM ←

∗CDA-7873R/TDA-7587R Only

NOTE

If you press the g DN button the display scrolls in reverse sequence.

3 Press the TUNE button to turn on or off the "REG" (Regional) mode.

In the "REG OFF" mode, the unit automatically keeps receiving the related local RDS station.

4 Press the SETUP button to deactivate the setting mode.

18-EN

Page 19 Page 21
Image 20
Page 19 Page 21
Contents CDA-7876RB CDA-7873R Alpine CD Changers Give You More Contents Precautions Never Attempt the Following Excessively Thin Tape Controlable with Remote Control CDA-7873R only Basic OperationDetaching the Front Panel Attaching the Front PanelAbout Demonstration Turning Power On and OffDisplay Angle Adjustment Selecting BBE Mode Adjusting Source Signal LevelChanging Backlighting Colour BAL FAD VOLSUB-W BAL Dimmer ControlSubwoofer On and Off Turning Mute Mode On/Off Sound Beep Guide FunctionSetting the AUX Mode V-Link Demonstration→ Bass → Treble → OFF Setting the Bass ControlSetting the Treble Control Defeat Setting the Bass ForwardBlackout Mode On and Off Changing the Audio Level Display Adjusting the built-in CrossoverSwitching the Display Modes → HI-FI → Normal → Stable Switching the Tuner Mode Manual TuningRadio Operation Automatic Seek Tuning Manual Storing of Station PresetsAutomatic Memory of Station Presets Tuning to Preset StationsSetting RDS Reception Mode and Receiving RDS Stations RDS OperationRecalling Preset RDS Stations Receiving RDS Regional Local Stations→ Light M → Classics → Other M PTY Programme Type TuningReceiving Traffic Information Priority PTY Programme Type When traffic information stations cannot be receivedReceiving Traffic Information While Playing CD or Radio Turning Emergency Alarm On or Off Displaying Radio Text→ Tuner → CD → CD CHANGER∗ Opening and Closing the Movable displayPlayback Music Sensor Skip Fast Forward and BackwardRepeat Play X. Random PlayDisplaying the Title/Text Titling Discs About Title and TextCD Text Scroll Setting Erasing Disc TitleInserting/Ejecting Cassette Normal Play and PauseDolby B NR Noise Reduction Blank Skip B.SKIPProgramme Sensor P.S Fast Forward and RewindManual Reverse Music Sensor M.S. Skip When a 12-disc CD Changer is connectedCD Changer Operation Repeat Play on Single Track or Entire Disc Disc Scan To Display CD TitlesSearching for Titled Discs Multi-Changer SelectionRemote Control Operation Controls on Remote ControlBattery Replacement CDA-7876RB/TDA-7588RB/TDA-7587R onlyInformation Case of DifficultyNo Magzn Specifications Remote Control CDA-7876RB/TDA-7588RB/TDA-7587R onlyCD Section CDA-7876RB/CDA-7873R only Tape Player Section TDA-7588RB/TDA-7587R onlyInstallation and Connections Do not Splice Into Electrical CablesPrecautions Installation RemovalConnection Choke CoilAudio Interrupt In Lead Pink/Black To prevent external noise from entering the audio system

TDA-7587R, TDA-7588RB, CDA-7873R, CDA-7876RB specifications

Alpine is renowned for its innovative audio solutions, producing high-quality car audio products that enhance in-vehicle listening experiences. Among their stellar range, the TDA-7588RB, CDA-7873R, TDA-7587R, and CDA-7876RB stand out for their advanced features and capabilities, catering to the needs of audiophiles and everyday users alike.

The Alpine TDA-7588RB is a cutting-edge receiver that combines modern technology with exceptional sound performance. It features Bluetooth connectivity, allowing seamless streaming of music and hands-free calling. The receiver is equipped with a built-in amplifier that delivers powerful sound, ensuring distortion-free audio even at higher volumes. The customizable equalizer settings enable users to fine-tune audio output to match their preferences. Moreover, the TDA-7588RB supports various audio formats, making it versatile for different media sources.

Similarly, the Alpine CDA-7873R showcases retro aesthetics with contemporary features. It incorporates an impressive built-in amplifier, producing clear and dynamic sound across various frequencies. With its CD player and MP3 playback capabilities, the CDA-7873R caters to diverse music formats. The receiver includes a highly-responsive LCD display, providing easy navigation through playlists and settings. Its comprehensive equalizer and crossover controls further enhance the listening experience, allowing for detailed sound adjustments.

The TDA-7587R is designed for efficiency and performance. Not only does it include Bluetooth technology for wireless convenience, but it also supports USB input for direct playback from various devices. The receiver’s user-friendly interface makes it simple to adjust settings and access music. Its high-performance audio processing technology delivers crisp sound reproduction, making it compatible with various sound systems.

Last but not least, the CDA-7876RB is packed with features aimed at delivering optimal audio quality. This receiver boasts advanced sound processing capabilities alongside Bluetooth support for easy connectivity. The high-voltage pre-output allows connection to external amplifiers, enhancing overall sound dynamics. The built-in SiriusXM readiness enables users to enjoy satellite radio, providing access to a plethora of channels.

All four Alpine models are designed with user experience in mind, featuring intuitive controls and elegant designs that complement any vehicle interior. With their advanced technologies and audio performance, the Alpine TDA-7588RB, CDA-7873R, TDA-7587R, and CDA-7876RB reinforce Alpine’s commitment to delivering groundbreaking audio solutions that cater to every driver’s musical taste.
Top Page Image Contents