Alpine CDA-7876RB Opening and Closing the Movable display, Playback, → Tuner → CD → CD CHANGER∗

Page 24

CD

SOURCE -/J

g DN

f UP

F

M.I.X.

REPEAT

SCAN

c

CD Player Operation (CDA-7876RB/CDA-7873R only)

Opening and Closing the Movable display

1 Press the c button.

The movable display will open.

(Movable display fully opened)

To close the movable display, press the c button again.

The movable display will close.

NOTES

•Do not apply shock to the movable display when it is open as it may result in malfunction of the unit.

•The display may be dim during low temperatures and immediately after turning on the power. The brightness will return to normal as time elapses.

•The display will stop at the set angle when closing.

CAUTION

Keep hands (or any other object) away from the display while it is opening or closing to avoid damage or injury. The back of the movable display will get very warm under normal operating conditions. This is not a malfunction. Do not touch.

Playback

1 Press the c button.

The movable display will open.

Insert a disc with the label side facing up.

2 Insert a disc with the label side facing up.

The disc will be pulled into the unit automatically. The movable display will close and playback will begin.

When a disc is already inserted, press the SOURCE button to switch to the CD mode. The mode will change every time the button is pressed.

→ TUNER → CD → CD CHANGER∗

(∗ Only when the CD changer is connected)

3 To pause playback, press the -/Jbutton. Pressing the -/Jbutton again will resume playback.

4 To eject the disc, press the c button.

NOTES

•If the CD does not eject, press c button again for at least 3 seconds with the movable display open.

•Only compact discs containing the mark shown can be used.

•We cannot fully guarantee the playback of CD-R (CD- Recordable). You cannot playback CD-RW (CD- ReWritable) on this unit.

22-EN

Page 23 Page 25
Image 24
Page 23 Page 25
Contents CDA-7876RB CDA-7873R Alpine CD Changers Give You More Contents Precautions Never Attempt the Following Excessively Thin Tape Controlable with Remote Control CDA-7873R only Basic OperationDetaching the Front Panel Attaching the Front PanelTurning Power On and Off Display Angle AdjustmentAbout Demonstration Selecting BBE Mode Adjusting Source Signal LevelChanging Backlighting Colour BAL FAD VOLDimmer Control Subwoofer On and OffSUB-W BAL Turning Mute Mode On/Off Sound Beep Guide FunctionSetting the AUX Mode V-Link DemonstrationSetting the Bass Control Setting the Treble Control→ Bass → Treble → OFF Setting the Bass Forward Blackout Mode On and OffDefeat Adjusting the built-in Crossover Switching the Display ModesChanging the Audio Level Display Switching the Tuner Mode Manual Tuning Radio Operation→ HI-FI → Normal → Stable Automatic Seek Tuning Manual Storing of Station PresetsAutomatic Memory of Station Presets Tuning to Preset StationsSetting RDS Reception Mode and Receiving RDS Stations RDS OperationRecalling Preset RDS Stations Receiving RDS Regional Local StationsPTY Programme Type Tuning Receiving Traffic Information→ Light M → Classics → Other M When traffic information stations cannot be received Receiving Traffic Information While Playing CD or RadioPriority PTY Programme Type Turning Emergency Alarm On or Off Displaying Radio TextOpening and Closing the Movable display Playback→ Tuner → CD → CD CHANGER∗ Music Sensor Skip Fast Forward and BackwardRepeat Play X. Random PlayDisplaying the Title/Text Titling Discs About Title and TextCD Text Scroll Setting Erasing Disc TitleInserting/Ejecting Cassette Normal Play and PauseDolby B NR Noise Reduction Blank Skip B.SKIPFast Forward and Rewind Manual ReverseProgramme Sensor P.S When a 12-disc CD Changer is connected CD Changer OperationMusic Sensor M.S. Skip Repeat Play on Single Track or Entire Disc Disc Scan To Display CD TitlesSearching for Titled Discs Multi-Changer SelectionRemote Control Operation Controls on Remote ControlBattery Replacement CDA-7876RB/TDA-7588RB/TDA-7587R onlyInformation Case of DifficultyNo Magzn Specifications Remote Control CDA-7876RB/TDA-7588RB/TDA-7587R onlyCD Section CDA-7876RB/CDA-7873R only Tape Player Section TDA-7588RB/TDA-7587R onlyInstallation and Connections Do not Splice Into Electrical CablesPrecautions Installation RemovalConnection Choke CoilAudio Interrupt In Lead Pink/Black To prevent external noise from entering the audio system

TDA-7587R, TDA-7588RB, CDA-7873R, CDA-7876RB specifications

Alpine is renowned for its innovative audio solutions, producing high-quality car audio products that enhance in-vehicle listening experiences. Among their stellar range, the TDA-7588RB, CDA-7873R, TDA-7587R, and CDA-7876RB stand out for their advanced features and capabilities, catering to the needs of audiophiles and everyday users alike.

The Alpine TDA-7588RB is a cutting-edge receiver that combines modern technology with exceptional sound performance. It features Bluetooth connectivity, allowing seamless streaming of music and hands-free calling. The receiver is equipped with a built-in amplifier that delivers powerful sound, ensuring distortion-free audio even at higher volumes. The customizable equalizer settings enable users to fine-tune audio output to match their preferences. Moreover, the TDA-7588RB supports various audio formats, making it versatile for different media sources.

Similarly, the Alpine CDA-7873R showcases retro aesthetics with contemporary features. It incorporates an impressive built-in amplifier, producing clear and dynamic sound across various frequencies. With its CD player and MP3 playback capabilities, the CDA-7873R caters to diverse music formats. The receiver includes a highly-responsive LCD display, providing easy navigation through playlists and settings. Its comprehensive equalizer and crossover controls further enhance the listening experience, allowing for detailed sound adjustments.

The TDA-7587R is designed for efficiency and performance. Not only does it include Bluetooth technology for wireless convenience, but it also supports USB input for direct playback from various devices. The receiver’s user-friendly interface makes it simple to adjust settings and access music. Its high-performance audio processing technology delivers crisp sound reproduction, making it compatible with various sound systems.

Last but not least, the CDA-7876RB is packed with features aimed at delivering optimal audio quality. This receiver boasts advanced sound processing capabilities alongside Bluetooth support for easy connectivity. The high-voltage pre-output allows connection to external amplifiers, enhancing overall sound dynamics. The built-in SiriusXM readiness enables users to enjoy satellite radio, providing access to a plethora of channels.

All four Alpine models are designed with user experience in mind, featuring intuitive controls and elegant designs that complement any vehicle interior. With their advanced technologies and audio performance, the Alpine TDA-7588RB, CDA-7873R, TDA-7587R, and CDA-7876RB reinforce Alpine’s commitment to delivering groundbreaking audio solutions that cater to every driver’s musical taste.
Top Page Image Contents