Alpine TDA-7587R, CDA-7876RB, CDA-7873R, TDA-7588RB owner manual Audio Interrupt In Lead Pink/Black

Page 43

1Antenna Receptacle

Connect to the supplied ISO antenna convertor plug.

2Audio Interrupt In Lead (Pink/Black)

Connect this lead to the Audio Interface output of a cellular phone which provides ground shorting when a call is received.

3Remote Turn-On Lead (Blue/White)

Connect this lead to the remote turn-on lead of your amplifier or signal processor.

4Dimmer Lead (Orange)

This lead may be connected to the vehicle’s instrument cluster illumination lead. This will enable the vehicle’s dimmer control to dim the backlighting of the unit.

5Switched Power Lead (Ignition) (Red)

Connect this lead to an open terminal on the vehicle’s fuse box or another unused power source which provides (+) 12V only when the ignition is turned on or in the accessory position.

6Power Antenna Lead (Blue)

Connect this lead to the +B terminal of your power antenna, if applicable.

NOTE

This lead should be used only for controlling the vehicle's power antenna. Do not use this lead to turn on an amplifier or a signal processor, etc.

7Fuse Holder (20A)

8Battery Lead (Yellow)

Connect this lead to the positive (+) post of the vehicle's battery.

For the battery lead and battery connection Use an extension battery lead (20A)(sold separately) and connect it directly to the positive

(+) side of the vehicle's battery.

9ISO Power Supply Connector ! Ground Lead (Black)

Connect this lead to a good chassis ground on the vehicle. Make sure the connection is made to bare metal and is securely fastened using the sheet metal

screw provided.

" Ai-NET Connector

Connect this to the output or input connector of other product (CD changer, Equalizer, etc.) equipped with Ai-NET.

#System Switch

When connecting a processor using Ai-NET, place this switch in the EQ/DIV position. When no device is connected, leave the switch in the NORM position.

NOTE

Be sure to turn the power off to the unit before changing the switch position.

$ Power Supply Connector

%ISO Connector (Speaker Output)

&Left Rear (+) Speaker Output Lead (Green) ( Left Rear (–) Speaker Output Lead (Green/

Black)

) Left Front (+) Speaker Output Lead (White)

~ Left Front (–) Speaker Output Lead (White/Black) + Right Front (–) Speaker Output Lead (Grey/

Black)

, Right Front (+) Speaker Output Lead (Grey) - Right Rear (–) Speaker Output Lead (Violet/

Black)

. Right Rear (+) Speaker Output Lead (Violet) / Remote Control Interface Connector

To remote control interface box.

: Ai-NET Cable (Included with CD Changer) ; Front Output RCA Connectors

RED is right and WHITE is left.

< Rear Output RCA Connectors

RED is right and WHITE is left.

= Subwoofer Output RCA Connectors

RED is right and WHITE is left.

> DC/DC Converter (CDA-7876RB/TDA-7588RB only)

NOTES

•Do not install the converter at a location subjected to water such as under the floor mat or air conditioner. This may cause a malfunction.

•Do not bundle the DC/DC converter cable with other audio cables. Doing so may induce noise into your system.

•Keep the DC/DC converter away from the Antenna cables and the rear side of the unit, otherwise noise may be generated when receiving radio broadcast.

To prevent external noise from entering the audio system.

•Locate the unit and route the leads at least 10 cm away from the car harness.

•Keep the battery power leads as far away from other leads as possible.

•Connect the ground lead securely to a bare metal spot (remove any paint, dirt or grease if necessary) of the car chassis.

•If you add an optional noise suppressor, connect it as far away from the unit as possible. Your Alpine dealer carries various noise suppressors, contact them for further information.

•Your Alpine dealer knows best about noise prevention measures so consult your dealer for further information.

41-EN

Page 42 Page 44
Image 43
Page 42 Page 44
Contents CDA-7876RB CDA-7873R Alpine CD Changers Give You More Contents Precautions Never Attempt the Following Excessively Thin Tape Attaching the Front Panel Controlable with Remote Control CDA-7873R onlyBasic Operation Detaching the Front PanelDisplay Angle Adjustment Turning Power On and OffAbout Demonstration BAL FAD VOL Selecting BBE ModeAdjusting Source Signal Level Changing Backlighting ColourSubwoofer On and Off Dimmer ControlSUB-W BAL Sound Beep Guide Function Turning Mute Mode On/OffDemonstration Setting the AUX Mode V-LinkSetting the Treble Control Setting the Bass Control→ Bass → Treble → OFF Blackout Mode On and Off Setting the Bass ForwardDefeat Switching the Display Modes Adjusting the built-in CrossoverChanging the Audio Level Display Radio Operation Switching the Tuner Mode Manual Tuning→ HI-FI → Normal → Stable Manual Storing of Station Presets Automatic Seek TuningTuning to Preset Stations Automatic Memory of Station PresetsRDS Operation Setting RDS Reception Mode and Receiving RDS StationsReceiving RDS Regional Local Stations Recalling Preset RDS StationsReceiving Traffic Information PTY Programme Type Tuning→ Light M → Classics → Other M Receiving Traffic Information While Playing CD or Radio When traffic information stations cannot be receivedPriority PTY Programme Type Displaying Radio Text Turning Emergency Alarm On or OffPlayback Opening and Closing the Movable display→ Tuner → CD → CD CHANGER∗ X. Random Play Music Sensor SkipFast Forward and Backward Repeat PlayAbout Title and Text Displaying the Title/Text Titling DiscsErasing Disc Title CD Text Scroll SettingBlank Skip B.SKIP Inserting/Ejecting CassetteNormal Play and Pause Dolby B NR Noise ReductionManual Reverse Fast Forward and RewindProgramme Sensor P.S CD Changer Operation When a 12-disc CD Changer is connectedMusic Sensor M.S. Skip Repeat Play on Single Track or Entire Disc To Display CD Titles Disc ScanMulti-Changer Selection Searching for Titled DiscsControls on Remote Control Remote Control OperationCDA-7876RB/TDA-7588RB/TDA-7587R only Battery ReplacementCase of Difficulty InformationNo Magzn Tape Player Section TDA-7588RB/TDA-7587R only SpecificationsRemote Control CDA-7876RB/TDA-7588RB/TDA-7587R only CD Section CDA-7876RB/CDA-7873R onlyDo not Splice Into Electrical Cables Installation and ConnectionsPrecautions Removal InstallationChoke Coil ConnectionTo prevent external noise from entering the audio system Audio Interrupt In Lead Pink/Black

TDA-7587R, TDA-7588RB, CDA-7873R, CDA-7876RB specifications

Alpine is renowned for its innovative audio solutions, producing high-quality car audio products that enhance in-vehicle listening experiences. Among their stellar range, the TDA-7588RB, CDA-7873R, TDA-7587R, and CDA-7876RB stand out for their advanced features and capabilities, catering to the needs of audiophiles and everyday users alike.

The Alpine TDA-7588RB is a cutting-edge receiver that combines modern technology with exceptional sound performance. It features Bluetooth connectivity, allowing seamless streaming of music and hands-free calling. The receiver is equipped with a built-in amplifier that delivers powerful sound, ensuring distortion-free audio even at higher volumes. The customizable equalizer settings enable users to fine-tune audio output to match their preferences. Moreover, the TDA-7588RB supports various audio formats, making it versatile for different media sources.

Similarly, the Alpine CDA-7873R showcases retro aesthetics with contemporary features. It incorporates an impressive built-in amplifier, producing clear and dynamic sound across various frequencies. With its CD player and MP3 playback capabilities, the CDA-7873R caters to diverse music formats. The receiver includes a highly-responsive LCD display, providing easy navigation through playlists and settings. Its comprehensive equalizer and crossover controls further enhance the listening experience, allowing for detailed sound adjustments.

The TDA-7587R is designed for efficiency and performance. Not only does it include Bluetooth technology for wireless convenience, but it also supports USB input for direct playback from various devices. The receiver’s user-friendly interface makes it simple to adjust settings and access music. Its high-performance audio processing technology delivers crisp sound reproduction, making it compatible with various sound systems.

Last but not least, the CDA-7876RB is packed with features aimed at delivering optimal audio quality. This receiver boasts advanced sound processing capabilities alongside Bluetooth support for easy connectivity. The high-voltage pre-output allows connection to external amplifiers, enhancing overall sound dynamics. The built-in SiriusXM readiness enables users to enjoy satellite radio, providing access to a plethora of channels.

All four Alpine models are designed with user experience in mind, featuring intuitive controls and elegant designs that complement any vehicle interior. With their advanced technologies and audio performance, the Alpine TDA-7588RB, CDA-7873R, TDA-7587R, and CDA-7876RB reinforce Alpine’s commitment to delivering groundbreaking audio solutions that cater to every driver’s musical taste.
Top Page Image Contents