Receiving a Multicast Station (HD Radio mode only)
Multicasting is the ability to broadcast multiple program streams over a single FM frequency. This increases the amount and diversity of content choices. A maximum of eight multicast station channels can be selected on this unit.
Note
•Make sure LISTENMODE is set to other than ANALOG (refer to “Switching the listening mode” on page 24).
When multicast station is received, the program number and the Multicast indicator lights up. Press or to select the desired program service.*
Receiving the Multicast Station Program Service.
Program No.
Notes
•During tagging, the iPod/iPhone takes priority to save the tag information. If no iPod/iPhone is connected, the tag information is saved to this unit.
•When the memory of iPod/iPhone is full, “iPod FULL” and “TAG COUNT X” are displayed. The tag information will be stored to the unit.
•If the operation is failed, “CANNOT TAG” is displayed.
•This unit can store a maximum of 50 tagged songs. When the memory of the unit is full, “TAGCOUNT50” and “MEMO FULL” are displayed.
•When an iPod that doesn’t support the tagging function is connected,
•When the iPod/iPhone is disconnected from the unit during tagging, its tag information will be stored in the unit.
•If there is stored tag information on the unit, when an iPod/iPhone supporting the tag function is connected, the stored tag information will be transferred to the iPod/iPhone automatically. When the iPod/iPhone memory becomes full, “iPod FULL” will be displayed, and any remaining tag information on the unit will not be transferred to the iPod/iPhone.
•If a tagged song already exists, “ALREADY TAGGED” will be displayed when you try to tag the song again.
Multicast indicator
Program Service example:
Multicast Radio | Program No. | Program Service | |
Station | |||
|
| ||
88.1 MHz | 1 | Main Program Service | |
88.1 MHz | 2 | ||
88.1 MHz | 3 | ||
|
| ||
|
| ||
|
| ||
|
| ||
88.1 MHz | 8 |
*This operation can be performed only when MC SEEK is set to ON (refer to “Setting the Multicast Seek” on page 24).
Storing the tag information (HD Radio mode only)
iTunes Tagging lets you tag songs heard on HD Radio stations. You can preview, buy and download later, songs from your iTunes tagged playlist the next time you sync your iPod/iPhone. If the unit is connected to a Tagging compatible iPod/iPhone, you can use the iTunes Tagging function. For details, refer to the Owner’s Manual of the Tagging compatible iPod/iPhone.
The mindicator will light when a song playing on an HD Radio station has tag information available.
Press and hold VIEW k/Tag for at least 2 seconds to save its tag information.
If no iPod/iPhone is connected, “TAG COUNT X” is displayed (X is the total number of tagged songs stored in this unit).
About the Feature Logos
•Digital,
•Program Service Data: Contributes to the superior user experience of HD Radio Technology. Presents song name, artist, station IDs, HD2/ HD3 Channel Guide, and other relevant data streams.
•Adjacent to traditional main stations are extra local FM channels. These HD2/HD3 Channels provide new, original music as well as deep cuts into traditional genre.
•iTunes® Tagging provides you the opportunity to discover a wide
range of content and the means to “tag” that content for later review and purchase from the iTunes® Store.