Alpine 68-21627Z10-A Getting Started, Accessory List, Turning Power On and Off, Source Selection

Getting Started

SOURCE/

Rotary encoder/ /ENTER

 AUDIO/SETUP

Detaching and Attaching the Front Panel

Detaching

1Turn off the unit power.

2Press eat the lower left side until the front panel pops out.

3Grasp the left side of the front panel and pull it out.

Accessory List
•	Head Unit	1
•	Power Cable	1
•	Microphone	1
•	Mounting Sleeve	1
•	Carrying Case	1
•	Bracket key	2
• Screw (M5 × 8)		4
•	Owner’s Manual	1 set

Turning Power On and Off

Press SOURCEto turn on the unit.

Note

•The unit can be turned on by pressing any other button except and e.

Press and hold SOURCEfor at least 2 seconds to turn off the unit.

Note

• The first time power is turned on, the volume will start from level 12.

Source Selection

Press SOURCEto change the source.

HD RADIO SIRIUSXM*1 DISC USB AUDIO/iPod*2  BT AUDIO*3 BT PANDORA*4 AUXILIARY*5 HD RADIO

*1 Displayed only when a SiriusXM Tuner is connected. (CDE-HD138BT only)

*2 Only when the iPod/iPhone is connected.

*3 Only when AUDIO is set to ON. Refer to “Setting the BLUETOOTH Connection (BT IN)” on page 27.

*4 Only when BT PANDORA is set to ON. Refer to “Setting the BLUETOOTH Connection (BT IN)” on page 27.

*5 Only when AUX SETUP is set to ON. For details, refer to “Setting the AUX SETUP Mode” on page 23.

Notes

•The front panel may become hot in normal usage (especially the connector terminals on the back of the front panel). This is not a malfunction.

•To protect the front panel, place it in the supplied carrying case.

•When detaching the front panel, do not apply excessive force as it may result in malfunction.

Attaching

1Insert the right side of the front panel into the main unit. Align the groove on the front panel with the projections on the main unit.

2Push the left side of the front panel until it locks firmly into the main unit.

Notes

•Before attaching the front panel, make sure that there is no dirt or dust on the connector terminals and no foreign object between the front panel and the main unit.

•Attach the front panel carefully, holding the sides of the front panel to avoid pushing buttons by mistake.

Initial System Start-Up

Be sure to press the RESET button when using the unit for the first time, after changing the car battery, etc.

1Turn off the unit power.

2Remove the detachable front panel.

9-EN