|
|
| Radio OperationEnglish |
|
| Manual Storing of Station | |
| 1 | Presets | |
|
|
| |
1 |
| 1. | Tune in the desired radio station you wish to |
|
| store in the preset memory. | |
|
| 2. | Press and hold any one of the preset |
|
|
|
|
|
|
|
|
|
|
| buttons (1 through 6 ) for at least 2 |
|
|
|
|
|
|
|
|
|
|
| seconds. The frequency display will begin |
|
|
|
|
|
|
|
|
|
|
| to blink. |
1 |
| 2 |
| 3 |
| 4 |
| 5 |
| 6 | 3. Press the preset button into which you wish |
to store the station while the display is blinking (within 5 seconds).
The display stops blinking once the station has been memorized. The display shows the band, preset No. with a triangle ( 
) and the station frequency memorized.
4.Repeat the procedure to store 5 other stations onto the same band.
To use this procedure for other bands, simply select the band desired and follow steps 1 – 3 above.
A total of 24 stations can be stored in the preset memory (6 stations for each band; FM1, FM2, AM and D.A.P.).
Note: If you store a station in a preset memory which already has a station, the current station will be cleared and replaced with the new station.
17