Alpine 3DA-W882E owner manual Press the Title button to store the first

		Radio OperationEnglish
5		Titling Stations (Continued)
5		Press the TITLE button to store the first
	A	character. The first character will stop blinking
CLK	TITLE	and the display will automatically advance to
	or/ou/o
		the next character. When that character begins
	ALPINE	to blink, you may choose the next letter or
		symbol of your title.
6		Repeat the steps		and	above to complete
		the titling. All 8 character positions should be
		filled. Use spaces where characters are not
		needed (for example at the end of a 5 character
		title, use 3 spaces to complete the title).
7		After the last character has been entered
		(character number 8), the title will automatically
		be stored.
		Notes:
		• When you want to erase a title, enter the
		"	" symbol into all spaces.
		When the title memory is used up, the
		display shows "FULL DATA." Storing new
		station titles after the "FULL DATA"
		message has been displayed, causes
		previously stored titles to be erased. The
		new station titles will replace the old titles
		beginning with the first one created.
		• A total of 24 titles for AM and FM stations
		may be entered.

24