Alpine 3DA-W882E owner manual Setting Time, 1230

		Clock OperationEnglish
1		Setting Time
2 3	4
1		Make sure you are in the Clock mode by
	12:30	pressing the Clock button (see page 54). Then,
CLK	TITLE	press and hold the CLK (Clock) button for at
		least 3 seconds. The time indication will begin
		to blink.

2

3

			To set the time to the nearest hour, press the
			CT button while the time indication is blinking.
CT		12:00
			For example, if the time shown in the display is
	4
			9:35, the CT function will change it to 10:00. If
			the display shows 9:29, the CT function will set
			the time to 9:00.
H			Example: To adjust to 9:35
	5	9:00	Press the "H" button to adjust the hours while
			the time indication is blinking.

4

M

6

9:35

9:35

Press the "M" button to adjust the minutes while the time indication is blinking.

The time automatically sets after 5 seconds of inactivity. It can be manually set by pressing the CLK button immediately after making adjust- ments. The time display stops blinking when set.

55