Sound Setting
Rotary encoder (AUDIO/LOUD)
SOURCE/
BAND
/ESC A.SEL
Setting the Bass Control
You can change the Bass Frequency emphasis to create your own tonal preference.
1Press A.SEL repeatedly to select the BASS mode.
BASS 
TREBLE 
HPF 
BASS
Setting the Bass Center Frequency
80Hz 
100Hz 
200Hz 
60Hz 
80Hz
Emphasizes the displayed bass frequency ranges.
Adjusting Bass/Treble/Balance (Between
Left and Right)/Fader (Between Front
and Rear)/Defeat
1Press Rotary encoder (AUDIO) repeatedly to choose the desired mode.
Each press changes the mode as follows:
SUBW* 
BASS 
TREBLE 
BALANCE 
FADER 
DEFEAT 
VOLUME 
SUBW
Subwoofer : 0 ~ +15
Bass level:
Treble level:
Balance : L15 ~ R15
Fader : R15 ~ F15
Defeat : ON/OFF
Volume : 0 ~ 35
•If no operation is performed for 5 seconds after selecting the SUBW, BASS, TREBLE, BALANCE, FADER or DEFEAT mode, the unit automatically returns to normal mode.
* When the subwoofer mode is set to OFF, its level cannot be adjusted.
2Turn the Rotary encoder until the desired sound is obtained in each mode.
By setting Defeat ON, previously adjusted settings of BASS and TREBLE will return to the factory defaults.
Setting the Bass Bandwidth
2-2 Press SOURCE/
to select the desired bass bandwidth.
Changes the boosted bass bandwidth to wide or narrow. A wider setting will boost a wide range of frequencies above and below the center frequency. A narrower setting will boost only frequencies near the center frequency.
Setting the Bass Level
You can emphasize or weaken the bass level.
3Press and hold 
/ESC for at least 2 seconds to return to normal mode.
•If no operation is performed for 15 seconds, the unit will return to normal mode automatically.
•The bass level settings will be individually memorized for each source (FM, AM, CD, etc.) until the setting is changed. The bass frequency and bass bandwidth settings adjusted for one source are effective for all other sources (FM, AM, CD etc.).
•The function is inoperable when DEFEAT is set to ON.
*1 The adjustment can also be made by pressing Rotary encoder. Refer to “Adjusting Bass/Treble/Balance (Between Left and Right)/Fader (Between Front and Rear)/Defeat” (page 12).