Setting the Bass Control |
| Setting the Treble Control |
You can change the Bass Frequency emphasis to create your own tonal |
| You can change the Treble Frequency emphasis to create your own tonal |
preference. |
| preference. |
1 Press and hold A.SEL for at least 2 seconds to activate the Sound Setting mode.
1 Press and hold A.SEL for at least 2 seconds to activate the Sound Setting mode.
2 Press A.SEL repeatedly to select the BASS mode. | 2 Press A.SEL repeatedly to select the TREBLE mode. |
BASS TREBLE HPF BASS | BASS TREBLE HPF BASS |
Setting the Bass Centre Frequency
80 Hz 
100 Hz 
200 Hz 
60 Hz 
80 Hz
Emphasizes the displayed bass frequency ranges.
Setting the Treble Centre Frequency
10.0 kHz 
12.5 kHz 
15.0 kHz 
17.5 kHz 
10.0 kHz
Emphasizes the displayed treble frequency ranges.
Setting the Bass Bandwidth
3-2 Press SOURCE/
to select the desired bass bandwidth.
Changes the boosted bass bandwidth to wide or narrow. A wider setting will boost a wide range of frequencies above and below the centre frequency. A narrower setting will boost only frequencies near the centre frequency.
Setting the Bass Level
or 
to select the desired bass level
You can emphasize or weaken the bass level.
4 Press and hold 
/ESC for at least 2 seconds to return to normal mode.
•If no operation is performed for 15 seconds, the unit will return to normal mode automatically.
•The bass level settings will be individually memorized for each source (FM, MW (LW), CD, etc.) until the setting is changed. The bass frequency and bass bandwidth settings adjusted for one source are effective for all other sources (FM, MW (LW), CD, etc.).
•The function is inoperable when DEFEAT is set to ON.
*1 The adjustment can also be made by pressing AUDIO/RTN. Refer to “Adjusting Bass/Treble/Balance (Between Left and Right)/Fader (Between Front and Rear)/Loudness/Defeat” (page 13).
Setting the Treble Level
or 
to select the desired treble level
You can emphasize the treble level.
4 Press and hold 
/ESC for at least 2 seconds to return to normal mode.
•If no operation is performed for 15 seconds, the unit will return to normal mode automatically.
•The treble level settings will be individually memorized for each source (FM, MW (LW), CD, etc.) until the setting is changed. The Treble frequency settings adjusted for one source are effective for all other sources (FM, MW (LW), CD, etc.).
•The function is inoperable when DEFEAT is set to ON.
*2 The adjustment can also be made by pressing AUDIO/RTN. Refer to “Adjusting Bass/Treble/Balance (Between Left and Right)/Fader (Between Front and Rear)/Loudness/Defeat” (page 13).