Alpine CDE-9870R owner manual Setting RDS Reception Mode and Receiving RDS Stations

Page 9
If no operation is performed for 60 seconds, the unit will return to normal mode automatically.
Press
AUDIO/RTN to return to the previous mode.
Press and hold FUNC./SETUP for at least 2 seconds to return to normal mode.
4
In the OFF mode, the unit automatically keeps receiving the related local RDS station.
Press or to select ON or OFF.
Press or to select the REGIONAL mode, and then press / /ENT.
1 Press and hold FUNC./SETUP for at least 2 seconds to activate the SETUP mode.
2
3
cannot be received:
When the PI SEEK setting is on (refer to “PI SEEK Setting” on page 9), the unit searches again for a station in the PI (Programme Identification) list.
If there are still no stations receivable in the area, the unit displays the frequency of the preset station and the preset number disappears.
If the signal level of the Regional (Local) station being tuned becomes too weak to receive, press the same preset button to tune in a Regional station in other district.
For presetting the RDS stations, refer to the Radio Operation section. The RDS stations can be preset in the F1, F2 and F3 bands only.
Operate the unit while the indicator lights up. If no operation
is performed for 10 seconds, the indicator goes out.
Receiving RDS Regional (Local) Stations
If the preset station and the stations in the AF list
5
Make sure that the indicator light goes out, then press the preset button in which your desired RDS station is preset.
If the preset station’s signal is weak, the unit automatically searches and tunes to a stronger station in the AF (Alternative Frequencies) list.
1
2
3
4

RDS

//ENT BAND/TA

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

 

/AF

TITLE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

AUDIO/RTN

 

 

FUNC./SETUP

 

 

 

 

 

 

 

Setting RDS Reception Mode and Receiving RDS Stations

The RDS (Radio Data System) is a radio information system using the 57 kHz subcarrier of regular FM broadcast. The RDS allows you to receive a variety of information such as traffic information, station names, and to automatically re-tune to a stronger transmitter that is broadcasting the same programme.

1

Press FUNC./SETUP so that the

indicator

 

lights up.

 

 

2

Press 1

/AF to activate the RDS mode.

3

Press

or

to tune in the desired RDS

 

station.

 

 

 

4

Press 1

/AF again to deactivate the RDS mode.

5

Press FUNC./SETUP to activate the normal mode.

The indicator goes out.

Operate the unit while the indicator lights up. If no operation

is performed for 10 seconds, the indicator goes out.

The RDS digital data includes the following:

PI

Programme Identification

PS

Programme Service Name

AF

List of Alternative Frequencies

TP

Traffic Programme

TA

Traffic Announcement

EON

Enhanced Other Networks

Recalling Preset RDS Stations

Press FUNC./SETUP so that the indicator lights up.

Press 1 /AF to activate the RDS mode.

Press FUNC./SETUP to activate the normal mode.

The indicator goes out.

8-EN

Image 9
Contents CDE-9870R Contents Operating Instructions Installation and Connections Operating Instructions Never Attempt the Following On handling Compact Discs CD/CD-R/CD-RW Turning Power On and Off Accessory ListAdjusting Volume Getting StartedPresetting Stations Manually Presetting Stations AutomaticallyTuning to Preset Stations RadioRecalling Preset RDS Stations Setting RDS Reception Mode and Receiving RDS StationsWhen traffic information stations cannot be received PI Seek SettingReceiving Traffic Information Receiving Traffic Information While Playing CD or RadioRepeat Play PlaybackX. Random Play Searching from CD TextFile/Folder Name Search Concerning MP3 About MP3 What is MP3?Press AUDIO/RTN repeatedly to choose the desired mode Sound SettingPress or until the desired sound is obtained in each mode Each press changes the mode as followsSetting the Bass Control Setting the Treble Control Other Functions Adjusting the High Pass FilterDisplaying the Text Press or to select the desired HPF frequencyAdjusting Source Signal Levels Press or to change the settingSound Customizing About the indication displayExternal Device Visual CustomizingSetting the AUX+ Mode IPod OptionalIPods usable with this unit Direct Search Function Searching for a desired SongRandom Play Shuffle M.I.X Case of Difficulty InformationBasic RadioAudio Indication for iPod ModeIPod Indication for CD PlayerFM Tuner Section SpecificationsInstallation and Connections Removal InstallationJaso Antenna Plug ISO Antenna Plug ConnectionsSwitched Power Lead Ignition Red IPod Direct ConnectorPower Antenna Lead Blue Battery Lead YellowPage Page Page Page Page Français Español Italiano NO. Label