CD CHANGER CONTROLS
Built into this radio are controls to operate an optional
Adjustment of audio functions (volume, tone, balance, and fader) operate in the same manner during CD play as they do for radio/cassette play. The following controls will operate the CD changer when it is installed and connected to this radio. Refer to the owner’s manual included with the CD changer for instructions on the installation and correct loading and use of the CD magazine.
buMODESELECTOR(MODE)
With the CD changer connected to the unit, this button is used to select CD changer operation. To choose CD mode, press the button until the “DISC” and “TRACK” indications appear on the display panel. Press the Mode button again to change back
to radio or tape operation.
cl & cm DISC SELECT ( | DISC ) |
These buttons are used to select the desired disc for play. To advance to a higher
number disc, press the “
“ buttoncl . To return to a lower number disc, press
the “
“ buttoncm . The number of the disc in play will be shown on the display panel.
cn TRACK SELECT ( TRACK
)
This button is used to quickly select the beginning of a particular track. Tap the
Forward Track Select (
) side of the button or Backward Track Select ( ) side of the button to locate the desired track as shown by the track number on the display panel.
co CUE/REVIEW FUNCTIONS ( | ) ( | ) |
) side of the button to advance rapidly in forward direction or the Review ( ) side of the button to advance rapidly in the backward direction.
When the Cue (
) side of the button is held down and the end of the last track on the disc is reached or the Review ( ) side of the button is held down until the
beginning of the first track is reached, the unit will enter the Pause mode ( 
will flash on the display panel) until the button is released.
cpPAUSESELECTOR
Pressing this button will temporarily stop play of the disc (the 
indication will flash on the display panel). Press the button again to resume play of the disc from the point at which it had stopped.
cqTRACK/DISCSCAN(SCAN)
When the Scan button cq is pressed, the “SCAN” indication will appear on the display panel and the first 10 seconds of each track on the disc will be played in order. When a desired track is reached, press the Scan button cq again and play of that track will continue (“SCAN” will disappear from the display panel). The Track Scan mode will also be cancelled by activating any other disc function (Select, Cue, Review, Shuffle
or Repeat). | |
|