NOTES ON USE OF FRONT PANEL | DETACHING THE FRONT PANEL |
1.Make sure the front panel is
2.Do not press very hard on the front panel when attaching it to the chassis. No more than light to moderate pressure should be needed.
3.When attaching the front panel, make sure the right side is correctly engaged before pressing the left side to lock it into position.
4.When taking the front panel with you, please use the supplied carrying case to protect the panel from dirt and damage. Make sure there is no dust or dirt on the electrical terminals on the back of the panel as this could cause intermittent operation or other malfunctions.
Release Button
ATTACHING THE FRONT PANEL
Engage right side first
SETTING THE CLOCK
1.Switch the vehicle ignition and radio on.
2.Momentarily press the Time/Frequency (T/F) Select button dl so that the time is shown on the display panel.
3.Press and hold the Time/Frequency button until the time display begins flashing. While the display is still
flashing, press the Up Tuning (
) button to adjust the hours and then the Down Tuning (
) button to adjust the minutes to the correct time.
4.Five seconds after the last hour or minute adjustment is made, the time will be set in the unit and the display will return to the normal indication.
8 of 16