TROUBLESHOOTING
PROBLEM | SOLUTION |
IR remote inoperative
Verify that the batteries in the remote are fresh.
Verify that the remote sensor eye is not obstructed.
Disc won't play | Insert a disc with the label side facing up. | |
| ||
| Check the type of disc you put into disc tray. This PS2 only plays PS2 GAMES, DVDs, | |
| audio CDs. | |
| Both the unit and the disc are coded by region. If the region codes don’t match, the | |
| disc can’t be played. | |
| Make sure screen source is set to PS2. | |
|
| |
Play starts, but then stops immediately | The disc is dirty. Clean it. | |
| Condensation has formed. Allow player to dry out. | |
|
| |
No sound or distorted sound | Make sure your DVD is connected properly. Make sure all cables are securely | |
inserted into the appropriate jacks. | ||
| ||
| Make sure the Modulator is ON and the Frequency selected on the unit matches | |
| the frequency set on the radio. | |
| Make sure that unit is using Single Channel Headphones or Dual Channel | |
| Headphones set to channel A. | |
| For wireless headphones make sure the batteries are fresh. | |
|
| |
Can’t advance through a movie | It can’t advance through the opening credits and warning information that appear | |
| at the beginning of movies because the disc is programmed to prohibit that action. |
24