Audiovox AVD300T owner manual

F. Connections

Figure 3

1.Powering Your DVD Player ( Refer to Figure 3)

Connect the black wire (-) to the vehicle ground. Connect the red wire (+) to a switched (Accessory) 12VDC source. Plug the other end into the 12VDC input jack on the back of the unit.

2.Remote IR Receiver ( Refer to Figure 3)

Plug the 1/8” jack on the remote IR cable into the IR IN jack on the back of the DVD player. Place the IR receiver anywhere in the vehicle to allow remote control from any location.

7