Charging the Battery
1
2
3
4
Set the power switch to [OFF].
Insert the battery into the camera. (P14)
Open the terminal door.
A: How to open the terminal door
Insert the connection plug of the AC
adaptor into the DC IN socket of the camera.
THE SOCKET OUTLET SHALL BE INSTALLED NEAR THE EQUIPMENT AND SHALL BE EASILY ACCESSIBLE.
5
6
Plug the AC adaptor into the electrical outlet.
•The green status indicator 1 blinks and charging starts.
When the status indicator stops blinking, charging is complete.
•After charging is finished, remove the AC adaptor from the electrical outlet and then remove the connecting plug from the DC IN socket.
ªBattery indicator
The remaining battery power is displayed on the LCD monitor. (This is not displayed when using AC adaptor)
: The battery power is sufficient
: The remaining power is a little low 
: The remaining power is low
: Replace or recharge the battery
15
