ªCharging time and available recording time
(It records once at intervals of 30 seconds. Frash fires 1 time to 2 times. When the supplied 32 MB SD memory card is used)
Supplied battery pack
Approx. 120 min.
In setting LCD monitor to ON
Approx. 120 min.
(equal to 240 still pictures)
In setting LCD monitor to OFF
Approx. 180 min.
(equal to 360 still pictures)
A Charging time
B Continuous recording time (recordable number)
ªCharging environment and charging error
•Charge the battery in a place with the temperature of 10 - 35 °C. (The battery should also be the same temperature)
•When charging starts, the status indicator blinks at about 2 second intervals. If, after charging starts, the status indicator blinks quicker, this indicates a charging error.
In this case, remove the AC adaptor from the electrical outlet, remove the battery and check if both room and battery temperature is too low or high and then charge it again. (It is not possible to cancel the error by only turning the power off/on) If the problem persists, consult the dealer.
Connecting to an Electrical Outlet
If you use an AC adaptor and connect it to an electrical outlet, you can use the camera without worrying about the battery discharge. The connection method is the same as explained in “Charging the Battery”. (P15)
•During use, the camera becomes warm; this is not a malfunction.
16
