Taking Pictures with Burst Mode
S
A
P
M
By continuously pressing the shutter button, it is possible to record in burst mode. (4 frames/second maximum of 8 frames)
[Preparation]
•Set the operational mode dial and REC mode dial. (P25)
1 Set the operational mode dial to burst mode [ 
].
2 Press the shutter button halfway to
lock the focus, then press it fully to take pictures in sequence.
•It is possible to record in burst mode 4 frames in 1 second, at a shutter speed higher than 1/25, but the flash does not fire simultaneously.
•If the flash fires, it is possible to record only 1 frame.
•When quality is set to TIFF [ 
], it is not possible to use the burst mode.
•When quality is set to fine [ 
], it is possible to record in burst mode a maximum of 4 frames.
•In motion image mode [ 
], the burst mode cannot be used.
•Only the first picture recorded is displayed on the LCD monitor.
56
