Using the Auto Review
REC 
SETUP
MONITOR
AUTO REVIEW
BEEP
POWER SAVE 2 MIN.
NO. RESET
CLOCK SET
SELECT:
SET 
EXIT 
Recording with the auto review set to [ON], the recorded picture is automatically displayed on the LCD monitor for about 2 seconds.
[Preparation]
Set the operational mode dial to REC mode (single mode [
] or burst mode [ 
]).
1 Press the [MENU] button.
2 Press 1 to open the setup menu.
3 Press 3/4 to select [AUTO REVIEW].
4 Press 2/1 to select [ON].
5 Press the [MENU] button.
•The menu will disappear.
•In burst mode [ 
], auto bracket or focus bracket, only the first recorded picture is displayed.
•Although setting the auto review to [ON], it is not available in motion image mode [ 
].
•When recording in burst mode [ 
], auto bracket, focus bracket, TIFF or still picture with audio modes, the auto review is set to [ON].
79
