Battery
•Extremely high or low temperatures will shorten the life of the battery.
•If the battery is kept in smoky or dusty places, the terminal may rust and cause malfunctions.
•Do not allow the battery terminals to come in contact with metal objects (such as necklaces, hairpins, etc.). This can result in a short circuit or heat generation and, if you touch the battery in this condition, you may be badly burned.
•Store the battery in a completely discharged state. To store the battery for a long period of time, we recommend you charge it once every year and store it again after you completely use up the charged capacity.
Card
•When the card is being read, do not remove the card, turn off the power, or subject it to vibration or impact.
•Do not leave the card in places where there is high temperature or direct sunlight, or where electromagnetic waves or static electricity are easily generated.
•Do not bend or drop the card. The card or the recorded content may be damaged.
•After use, be sure to remove the card from the digital camera.
•Do not touch the terminals on the back of the card with your fingers. Do not allow dirt, dust or water to enter it.
ªLCD Monitor/Viewfinder/ Lens Ring
LCD monitor
•In a place with drastic temperature changes, condensation may form
on the LCD monitor. Wipe it with soft dry cloth.
•If the digital camera is extremely cold when you turn the power on, the image on the LCD monitor is slightly darker than usual at first.
However, as the internal temperature increases, it goes back to the normal brightness.
...........................................................
Extremely high precision technology is employed to produce the LCD monitor screen featuring a total of approximately 110,000 pixels. The result is more than 99.99% effective pixels with a mere 0.01% of the pixels inactive or always lit. However, this is not a malfunction and does not affect the recorded picture.
...........................................................
Viewfinder
•Do not direct the viewfinder or lens to the sun. Internal components may be seriously damaged.
Lens ring
•Do not attach other conversion lenses on the lens ring; there is no mount to be used for the attachment.
•When you want to attach the tele conversion lens
•If you push the zoom lever toward W during recording with the filter or conversion lens attached to the digital camera, 4 corners of the image may become dark (vignetting). For details, refer to the operating instructions of your accessories.
90
