Inserting the Battery
[Preparation]
• Set the power switch to [OFF].
SE | OP |
LO | EN |
C |
|
[Inserting]
[Removing]
SE | OP |
LO | EN |
C |
|
1 Rotate the lever towards the [OPEN] direction to open the battery door.
2 Insert the battery all the way in, until it is locked.
3 Close the battery door and rotate
the lever towards the [CLOSE] direction.
[Removing the battery]
1 Rotate the lever towards the [OPEN] direction to open the battery door.
2 Press the lock in the direction of the arrow to remove the battery.
3 Close the battery door and rotate
the lever towards the [CLOSE] direction.
•If you will not use the camera for a long time, remove the battery. (When you insert the battery again, set the date)
•Before removing the battery from the camera, set the power switch to [OFF].
•The supplied battery is for exclusive use with this camera. Do not use it except with this camera.
CAUTION
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions.
14
