Checking the Last Picture (Review)
REVIEW
DELETE
REVIEW 
DELETE 
After taking a picture, when auto review (P79) is set to [ON], the captured picture is displayed on the LCD monitor for about 2 seconds, but you can also check the picture by following the methods shown below.
1 After taking a picture, press the [REVIEW/SET] button.
•The last captured picture is displayed for about 3 seconds. If you press the [REVIEW/SET] button again, the captured picture is zoomed 4 times (A) and 8 times if you press once again.
ªErasing the captured picture during the review
2 Press the [MENU] button.
3 When the message [DELETE THIS
PICTURE?] is displayed, press 3/4 to select [YES].
4 Press the [REVIEW/SET] button.
•The picture is erased.
•Once erased, pictures cannot be recovered.
DELETE THIS
DELETE THIS PICTURE?
NO |
YES |
SELECT : 
SET : 
•When using the burst mode [ 
], you can see only the first picture with the review.
•In motion image mode [ 
], the review cannot be used.
•When you turn the power switch to [OFF] or change the setting of the REC mode dial and operational mode dial, the review cannot be displayed.
29
