Recording Motion Images

S	P
A

135S

With this camera you can also record motion images. (If using the supplied 32MB SD memory card, it is possible to record for about

160seconds)

[Preparations]

•Insert the card. (P17)

•Set the power switch to [ON]. (P19)

•Set the operational mode dial to single mode [ ]. (P25)

1 Set the REC mode dial to motion image mode [ ].

2 Center the subject in the focus area

on the LCD monitor and press the shutter button halfway.

•When the focus is adjusted, the focus indication [¥] appears. (1 AF target)

3 By pressing the shutter button fully, the recording starts.

•The audio REC starts simultaneously.

4 By pressing the shutter button fully again, recording stops.

•If during the recording the memory of the card becomes full, the recording is stopped automatically.

ªAvailable settings in motion image mode

• Macro mode (P55)

• Manual focus (P57)

• Conversion (P58)

•Picture size (P37)

•Built-in flash (P33)

•White balance (P50)

•Metering mode (P48)

•ISO sensitivity (P52)

•The remaining time displayed on the LCD monitor is an approximation.

•It is not possible to record motion images without audio.

•If using the MultiMediaCard, after recording motion images, the screen may appear grey, but this is not a malfunction.

•When recording starts, the auto focus and zoom are locked (with the first frame).

•Except with the supplied card (e.g. MultiMediaCard), when recording motion images, it could happen that the recording suddenly stops.