Taking Pictures (AUTO Mode)

S

A

P

M

By only pressing the shutter button, the exposure (shutter speed and aperture value) will be automatically adjusted and the picture will be taken.

[Preparations]

Insert the card. (P17)

Set the power switch to [ON]. (P19)

Set the operational mode dial to the single mode [ ]. (P25)

1 Set the REC mode dial to AUTO

mode [ ].

2 [A Optical finder]

Let the subject be centered in the AF target 1 inside the optical finder and press the shutter button halfway.

[B LCD monitor]

After centering the subject in the focus area 3 on the LCD monitor, press the shutter button halfway.

When the focus is adjusted, the focus indication [¥] 2 appears.

The shutter speed and the aperture value are automatically adjusted and displayed on the LCD monitor.

When the subject is out of the AF target or the focus area, take the AF/ AE lock. (P47)

3 Press the shutter button fully to take the picture.

After taking a picture, when the auto review (P79) is set to [ON], the picture is displayed on the LCD monitor for about 2 seconds.

When power saving time is set, if you do not operate the camera, it is automatically turned off at the set time. To operate the camera again, turn the power switch first to [OFF] and then to [ON], or press the shutter button. (P81)

There are times when the brightness of the LCD monitor differs from that of the recorded pictures. In particular, when taking pictures in dark places with a long time exposure, darkness appears on the LCD Monitor, but the recorded pictures are bright.

28

Page 28
Image 28
Panasonic DMC-LC5PP operating instructions Taking Pictures Auto Mode, Optical finder, LCD monitor