Turning Power on/off
1
2
Set the power switch to [ON].
•The status indicator lights.
Set the power switch to [OFF].
•When switching the power on/off, do not put any obstacle in front of the lens.
•When the operational mode dial is set to the REC mode and the power switch is set to [ON] without removing the lens cap, this message is displayed: “REMOVE LENS CAP AND PRESS SET BUTTON”. After removing the lens cap, press the [REVIEW/SET] button 1.
Adjusting the Optical Finder (Diopter Adjustment)
Before using the camera, by adjusting the dioptor, it is possible to see the AF target 1 inside the viewfinder well.
1 Adjust the diopter, rotating the diopter adjustment dial.
• Moving the zoom lever towards T and taking pictures at a distance of 70 cm - 1 m from the subject, make the top of the subject match with the parallax compensation mark 2, in order not to cut it. When an accurate framing is necessary, use the LCD monitor.
19
