INTRODUCTION:
Congratulations on purchasing the Gemini
FEATURES:
-Audio CD &
-Extra Large jog wheel
-
-2 Selectable Jog modes Pitch Bend/Search
-
-Single & continuous play modes
-Seamless loop with reloop
-Pitch bend via jog wheel or buttons +/- 24%
-Three mode time selection
-Frame accurate search
-Large blue backlit LCD display
-Variable pitch control with three settings +/- 8,16 & 24%
SAFETY SPECIFICATIONS:
Laser Diode Properties
Material: Ga - Al - As
Wavelength: 755 - 815 nm (25° C)
Laser Output: Continuous Wave, max. 0.5 mW
PRECAUTIONS:
1.Do not use this CD player at temperatures below 41°F/5°C or higher than 95°F/35°C.
2.The apparatus should not be exposed to dripping or splashing, and no objects filled with liquids such as vases should be placed on the apparatus.
3.Place the unit in a clean and dry location.
4.Do not place the unit in an unstable location.
5.When disconnecting the power cord from the AC outlet, always grasp it by the plug. Never pull the power cord.
6.To prevent electric shock, do not remove the cover or the bottom screws.
7.There are NO USER SERVICEABLE PARTS INSIDE. Please refer to a qualified technician.
IN THE USA ~ IF YOU EXPERIENCE PROBLEMS WITH THIS UNIT CALL GEMINI CUSTOMER SERVICE AT:
1 (732)
8.Do not use chemical solvents to clean the unit.
9.Keep the laser pickup clean by keeping the tray closed.
10.Keep this manual in a safe place for future reference.
CONNECTIONS:
1MAIN POWER RECEPTACLE: This is a Standard
your
The
2LINE OUTPUT JACKS Plug one end of the included RCA cable into LINE OUTPUT JACKS on the rear panel. Plug the other end of the
RCA connectors into any available line input jacks on your mixer. If you are connecting the
3CONTROL CABLES Plug the CONTROL CABLES to each side of the
the cable into its socket, making sure that the DIN connector at the end of the cable properly aligns with the drawing on the back of the
FUNCTIONS:
4POWER: Once you have connected all your cables and made sure that the VOLTAGE SELECTION SWITCH is set correctly, you can turn
the
5DISC TRAY: The DISC TRAY is where the CD is held during loading, unloading and playback, and holds both 12 cm and 8cm CD’s.(DO
NOT FORCE THE CD TRAY TO CLOSE EXCESSIVE FORCE WILL DAMAGE THE CD MECHANISM, USE THE OPEN AND CLOSE BUTTONS)
EJECT BUTTON: Pressing the EJECT BUTTON will open or close the
6DISC TRAY, unless the
NOTE: To eject a CD you must be in CD mode, simply press the
USB/CD button and then press EJECT.
JOG WHEEL : In SEARCH MODE the JOG WHEEL can be used to
7search forward or backwards in the music track, as well as for fine adjustments to a CUE point in PAUSE mode. In PITCH BEND mode the JOG WHEEL will function the same as the PITCH BEND allowing you to speed up (FORWARD) or slow down (REWIND) the music clockwise being (FORWARD) and counter clockwise being (REWIND).
JOG MODE BUTTON: When the JOG MODE BUTTON is illuminated
8 it indicates the the JOG WHEEL is in SEARCH MODE, and when not il- luminated it indicates that the JOG WHEEL is in PITCH BEND MODE.
DISPLAY: The DISPLAY shows the track number, pitch value, pitch
9bend, single, continue (for continuous play), play/pause modes, fast forward/reverse modes, loop mode, reloop mode, PGM, repeat modes, the playback display bar, and three different time displays. These times displays are TIME ELAPSED on the track, TIME REMAIN- ING on the disc and and TIME REMAINING on the track. Time is measured in minutes, seconds and frames.
10 | TIME: The TIME BUTTON switches the time display between three |
available sources, these three are TIME ELAPSED on the track, TIME |
REMAINING on the disc and and TIME REMAINING on the track. TIME ELAPSED indicates how much time has currently gone by since the play button was pressed, TIME REMAINING ON DISC will count down the time remaining on the entire disc and TIME REMAINING ON TRACK counts down the time that is left before the end of the track.
SINGLE: Pressing the SINGLE button engages SINGLE mode, in this
11 mode the
the first track of the disc and continue to play).
4