Gemini Industries CDMP-2600 Specifications, Pitch Control Slide Moving the Pitch Control Slide

FUNCTIONS: (CONTINUED)

12BPM: Press and hold the BPM button to turn on the BPM read out, once on you may TAP the button to the beat of the music, after a few TAPS

the display will read out the average BEATS PER MINUTE of the track.

PGM: Allows you to create a set playlist. To program a set list into the

13CDMP-2600memory, begin by stopping the unit from play and press- ing PGM to begin the set list. Select a track by using the track selection button to scan to the first track to be placed in the set list.

When you have selected the proper track press PGM and the CDMP-2600will be ready to set your next selection. Repeat the previ- ous steps until you have completed your playlist, then press play to begin the set list.

PITCH: Pushing the PITCH button activates the PITCH CONTROL SLIDE.

14The PITCH button has three settings 8%, 12% and 24% and can be toggled by pressing the PITCH button once for each setting . Push the PITCH button again to deactivate this mode.

15PITCH CONTROL SLIDE: Moving the PITCH CONTROL SLIDE

up or down will lower or raise the pitch percentage up to + or - 24% depending on the PITCH BUTTON setting.

16PITCH BEND: Pushing the PITCH BEND BUTTONS will automatically bend the pitch up to +26% or bend the pitch down to -26% depending

on the setting of the PITCH BUTTON. Releasing the buttons will return the pitch to the original pitch setting. You can use this function to match the beat when mixing from one song to another.

17LOOP SECTION: A LOOP repeats the section between the entry point (IN) and the exit point (OUT). To set a loop while the unit is playing,

start by pressing the IN BUTTON (it will light up) and when you reach the desired end loop point press the OUT BUTTON (it will also light up). The loop will continue playing until you press the OUT BUTTON again allowing the music to continue from that point on, to re-engage the loop you must press the RELOOP BUTTON. When you have released your loop the OUT BUTTON will turn OFF and the IN BUTTON will remain lit to indicate that your loop is stored in the CDMP-2600memory. Pressing the IN BUTTON again while the unit is playing will erase the previously saved loop while saving your new loop entry point. Press OUT to exit the loop and save a new complete loop.Press RELOOP to return to the beginning of the previously saved loop from normal play. Press RELOOP repeatedly to cause the loop to stutter.

NOTE: THE FIRST LOOP WILL HAVE A PAUSE AT THE EXIT POINT, WHILE ALL OTHERS WILL BE SEAMLESS.

18PLAY/PAUSE: Each press of the PLAY/PAUSE BUTTON

causes the operation to change from PLAY to PAUSE or from PAUSE back to PLAY. The PLAY/PAUSE BUTTON remains lit when in PLAY mode, while it blinks in PAUSE mode.

CUE: While the unit is playing and after the cue point has been

19programmed, pressing CUE will cause the CD player to enter the PAUSE mode (PLAY/PAUSE BUTTON blinks) at the programmed cue point (the CUE LED is lit). Holding down the CUE button

changes the function to preview , and allows you to stutter start or play from the programmed CUE POINT Releasing the CUE button will return the CD to the preset CUE point.

20REPEAT: Press the repeat button once to engage 1 or repeat the selected track. Press REPEAT again to engage ALL setting which will

repeat all the tracks on the CD. Press REPEAT again to disengage the repeat function.

CDMP-2600

21USB PORT The USB port allows the connection of any USB mass stor- age device*.

USB/CD SELECT BUTTON The USB/CD select button allows you to

22toggle from the CDMP-2600internal CD drive and the mass storage device connected to the USB port.

23TRACK SELECTION ROTARY: The TRACK SELECTION ROTARY allows you to navigate through folders or search through tracks

depending on weather you are in USB mode or CD mode.

In CD mode the rotary can search through cd tracks, turning the rotary to the right or clock-wise advances the selection, and turning the rotary to the left or counterclock-wise decreases the selection.

In USB mode the ROTARY knob allows you to search through folders and navigate through music libraries on your USB device.

TO CHOOSE A FOLDER: Press and hold the TRACK SELECTION ROTARY and turn it clockwise or counterclockwise to the folder you wish to search through, once you have found the disered folder, release the TRACK SELECTION ROTARY and the display will show the first song in that folder. Once in a folder you can turn the TRACK SELECTION ROTARY to the song you wish to play and the CDMP-2600 will either automatically load the song when in single mode or play the song when in continuous mode.

NOTE : ONCE YOU HAVE SKIPPED TO ANOTHER TRACK, YOU MAY NOT GO BACK TO YOUR PRO- GRAMMED CUE POINT. YOU MUST BEGIN YOUR CUE SELECTION OVER AGAIN, THE CUE

WILL BE PRESET TO THE BEGINNING OF THE NEWLY SELECTED TRACK.

We recommend that you use a MASS STORAGE DEVICE that is no

*larger than 2 gb and that only has less than 100 folders with less than 1000 songs in any one folder. larger drives will work but they will greatly affect the time in which it takes to search and or load a song.

SPECIFICATIONS:

GENERAL:

Type	Compact Disc Player & USB Mp3 Reader
Disc Type	Standard Compact discs (12 cm & 8 cm)
Time Display	Track Elapsed, Track Remain, or Total remain
Variable Pitch	± 24% Slider with Resume Switch
Pitch Bend	± 26% Maximum
Instant Start	Within 0.03 seconds
Installation	19" each
Dimensions	Main unit: 19" x 3.5" x 10" (482.6 x 88.9 x 254mm)

…….........…Remote unit: 19" x 3.5" x 3.5" (482.6 x 88.9 x 88.9 mm)

Weight Per Unit..................................................Main unit: 5.5 lbs. (2.5 kg)

…...................................................................Remote unit: 3.85 lbs.(1.74kg)

AUDIO SECTION:

Quantization	1 Bit Linear/Channel, 3 Beam Laser
Oversampling Rate	8 Times
Sampling Frequency	44.1 kHz
Frequency Response	20 Hz to 20 kHz
Total Harmonic Distortion	Less Than 0.05%
Signal to Noise Ratio	85 dB
Dynamic Range	85 dB
Channel Separation	85 dB (1 KHz)
Output Level	2.0 +/- 0.2V R.M.S.
Power Supply	AC 115/230V, 60/50 Hz

SPECIFICATIONS AND DESIGN ARE SUBJECT TO CHANGE	5
WITHOUT NOTICE FOR PURPOSE OF IMPROVEMENT.