SPECIFICATION
GENERAL |
|
Supply Voltage | DC 13.8V. Negative Ground |
Current Consumption | Max.10A |
MAX Power Output | 25Watts X 4 |
Number of channels | 2 STEREO channels. |
Unit Dimensions | 178[W] X 164[D] X 50[H] mm. |
FM SECTION |
|
Frequency range | 87.5MHz |
Effective sensitivity | 3uV. |
I.F Frequency | 10.7MHz. |
AM SECTION |
|
Frequency range | 530KHz - 1710KHz |
Effective sensitivity | 40dB. |
I.F Frequency | 450KHz |
RCA LINE OUT (OPTION) |
|
Output | 1200mV @ CD MAX. |
CD PLAYER |
|
System | MP3 Audio System. |
Suitable CDs | MP3, CD, |
Frequency characteristics | |
| \ |
| |
S/N Ratio to CD | \ |
50dB [1KHz] |
LOCATION AND FUNCTION OF CONTROLS
1. SEL( AUDIO MODE SELECT) BUTTON / ROTARY VOL KNOB
(1)Press SEL button shortly and repeatedly to change the mode in the sequence as follows:
1)VOLUME CONTROL
A.The volume level can be adjusted at any time by rotating the VOL knob as select mode has been initially defaulted at volume mode.
B.The volume level is also obtained by stepping through the SEL button until the function VOL is displayed and then rotate the VOL knob to adjust the sound level.
2)BASS CONTROL
A.Press the SEL button to select the bass mode until BAS appears on the display.
B.Rotate the VOL knob to adjust the bass effect.
3)TREBLE CONTROL
A.Press the SEL button to select the treble mode until TRE appears on the display.
B.Rotate the VOL knob to adjust the treble effect.
4)BALANCE CONTROL
A.Press the SEL button to select the balance mode until BAL appears on the display.
B.Rotate the VOL knob to increase or decrease the sound level of left or right speaker.
Page 13 | Page 2 |