Alpine CDM-7892R CD Player Operation, Opening and Closing the Movable display, Playback

Page 17

CD Player Operation

-/ J

c

Opening and Closing the Movable display

1 Press the c button.

The movable display will open.

(Movable display fully opened)

To close the movable display, press the c button

again.

The movable display will close.

NOTES

•Do not apply shock to the movable display when it is open as it may result in malfunction of the unit.

•The display may be dim during low temperatures and immediately after turning on the power. The brightness will return to normal as time elapses.

•The display will stop at the set angle when closing.

CAUTION

Keep hands (or any other object) away from the display while it is opening or closing to avoid damage or injury. The back of the movable display will get very warm under normal operating conditions. This is not a malfunction. Do not touch.

Playback

1 Press the c button.

The movable display will open.

Insert a disc with the label side facing up.

2 Insert a disc with the label side facing up.

The disc will be pulled into the unit automatically. The movable display will close and playback will begin.

When a disc is already inserted, press the SOURCE button to switch to the CD mode.

The mode will change every time the button is pressed.

→TUNER → CD → CD CHANGER∗

(∗ Only when the CD changer is connected)

3 To pause playback, press the -/Jbutton.

Pressing the -/Jbutton again will resume playback.

4 To eject the disc, press the c button.

NOTES

•If the CD does not eject, press c button again for at least 3 seconds with the movable display open.

•Do not insert or remove a CD when loading or ejecting a CD, as malfunction may result.

About the usable discs.

We recommend using only compact discs containing the marks shown below.

You can play CD-Rs (CD-Recordable)/CD-RWs (CD- ReWritable) for audio use on this unit. You can not also play CD-Rs/CD-RWs containing MP3 formatted audio files.

•Some of the following CDs may not play on this unit: Flawed CDs, CDs with fingerprints, CDs exposed to extreme temperatures or sunlight (e.g., left in the car or this unit), CDs recorded under unstable conditions, CDs not designed for audio use, CDs on which a recording failed a re-recording was attempted.

On handling Compact Discs (CD/CD-R/ CD-RW)

•Do not touch the surface.

•Do not expose the disc to direct sunlight.

•Do not affix stickers or labels and do not write on the surface.

•Clean the disc when it is dusty.

•Make sure that there are no bumps around the disc.

•Do not use commercially available disc accessories.

Do not leave the disc in the car or the unit for a long time. Never expose the disc to direct sunlight.

Heat and humidity may damage the CD and you may

not be able to play it again.

15-EN

Page 16 Page 18
Image 17
Page 16 Page 18
Contents CDM-7892R CHA-S634 CHA-1214 CHM-S630Contents Precautions Handling the Detachable Front Panel Detaching the Front Panel Basic OperationsAttaching the Front Panel Initial System Start-UpDisplay Angle Adjustment Turning Power On and OffAudio Mute Function Changing the Audio Level DisplaySetting the Treble Control Setting the Bass ControlAdjusting the built-in Crossover Basic OperationExample 2. Listening Position All Seats About the Time CorrectionExample 1. Listening Position Front Left Seat Bass Focus Example of Steps 2 and 3 SettingTime Difference Table Setting the MX ModeTime Correction Automatic Seek Tuning Manual TuningManual Storing of Station Presets Radio OperationsTuning to Preset Stations Automatic Memory of Station PresetsRecalling Preset RDS Stations Setting RDS Reception Mode and Receiving RDS StationsRDS Operations Receiving RDS Regional Local StationsReceiving Traffic Information PTY Programme Type TuningPriority News When traffic information stations cannot be receivedReceiving Traffic Information While Playing CD or Radio Playback CD Player OperationOpening and Closing the Movable display Music Sensor Skip X. Random PlayFast Forward and Backward Repeat PlayAdjusting Source Signal Levels Setup OperationSwitching the Tuner Mode Setting Frequency StepDemonstration Setting the AUX ModeCase of Difficulty InformationNo Magzn FM Tuner Section General SpecificationsPrecautions Installation and ConnectionsRemoval Installation24-EN ConnectionTo prevent external noise from entering the audio system Audio Interrupt In Lead Pink/BlackPage Händlerstemple GERÄTE-PASS

CDM-7892R specifications

The Alpine CDM-7892R is a high-performance car audio receiver that exemplifies modern technology and sound quality for audiophiles and casual listeners alike. As part of Alpine's renowned lineup, this model is designed to enhance the in-car listening experience with a blend of innovative features, connectivity options, and superior audio processing capabilities.

One of the standout features of the Alpine CDM-7892R is its ability to support various media formats, allowing users to enjoy their favorite tracks from CDs, MP3s, and even USB drives. The diverse playback options ensure that drivers can have their music library at their fingertips, providing an enjoyable experience on every journey. The front USB port also allows for convenient connection to digital devices, making it easy to play high-quality audio files directly from smartphones or USB flash drives.

A key highlight of the CDM-7892R is its built-in 24-bit DAC (Digital-to-Analog Converter) which significantly enhances audio fidelity. This technology ensures that even lossy audio formats sound smooth and rich, rejuvenating the listening experience with clarity and depth that audiophiles crave. Coupled with an advanced equalizer, users can fine-tune their sound preferences to achieve the perfect audio balance tailored to their taste.

For those who value connectivity, the Alpine CDM-7892R supports Bluetooth technology, enabling hands-free calling and wireless music streaming from compatible devices. This feature not only adds convenience but also promotes safe driving by allowing users to focus on the road while managing calls and playlists effortlessly.

The receiver's sleek, user-friendly interface is another notable characteristic. Featuring a bright, easily readable display, it allows intuitive navigation through the menu options. The ergonomic rotary knob simplifies volume control and track selection, ensuring users can adjust settings without taking their eyes off the road.

In terms of expandability, the CDM-7892R includes preamp outputs for connecting external amplifiers and speakers, providing options for users looking to transform their in-car audio system into a full-fledged sound experience. The model also supports high-fidelity audio systems, enabling enthusiasts to build on their setups for even greater sound performance.

In summary, the Alpine CDM-7892R is a versatile and feature-rich car audio receiver that caters to music lovers' needs. With its support for various media formats, advanced audio technologies, convenient Bluetooth connectivity, and user-friendly interface, it stands out as a top choice for anyone looking to upgrade their car audio system while enjoying high-quality sound wherever the road takes them.
Top Page Image Contents