Alpine CDM-7892R Turning Power On and Off, Display Angle Adjustment, Audio Mute Function

Page 7

Turning Power On and Off

1 Press the POWER button to turn on the unit.

NOTE

The unit can be turned on by pressing any other button except the eject c button.

The volume level gradually increases to the previous level you were listening to before the unit was turned off.

Press and hold the POWER button again for at least 3 seconds.

NOTE

The very first time the power is turned on, the volume will start from level 12.

Display Angle Adjustment

Movable display

The movable display may be adjusted to 3 different angles depending upon user preference.

1 Press the ANGLE 89 button to adjust the angle of the movable display.

NOTES

•The display will close a half minute after the ignition key is turned to the OFF position.

•The adjusted angle of the display is stored in memory. There is no need to re-adjust the angle when the power is turned back on.

CAUTION

Keep hands (or any other object) away from the display while it is opening or closing to avoid damage or injury. The back of the movable display will get very warm under normal operating conditions. This is not a malfunction. Do not touch.

Adjusting Volume/Balance (Between

Left and Right)/Fader (Between Front

and Rear)/Defeat

1 Press the MODE (Rotary encoder) button repeatedly to choose the desired mode.

Each press changes the modes as follows:

→Volume → Subwoofer∗→ Balance → Fader → Defeat

Volume :0~35

Balance :L15~R15

Fader :R15~F15

Subwoofer :0~+15

NOTES

•If the Rotary encoder is not turned in 5 seconds after selecting the BALANCE, FADER, DEFEAT and SUBWOOFER modes, the unit automatically sets in the VOLUME mode.

•∗ When the subwoofer is set to OFF, the level of the subwoofer cannot be adjusted.

2 Turn the Rotary encoder until the desired sound is obtained in each mode.

By setting Defeat ON, previously adjusted setting of Bass, Treble will return to the factory defaults, but MX will be turned off.

Audio Mute Function

Activating this function will instantly lower the volume level by 20 dB.

1 Press the MUTE button fto activate the MUTE mode. The audio level will decrease by about 20 dB. Pressing the MUTE button again will bring the audio back to its previous level.

Changing the Audio Level Display

ON/OFF

1 Press DISP button to change the Audio Level display ON/OFF.

5-EN

Page 6 Page 8
Image 7
Page 6 Page 8
Contents CDM-7892R CHA-S634 CHA-1214 CHM-S630Contents Precautions Handling the Detachable Front Panel Initial System Start-Up Basic OperationsDetaching the Front Panel Attaching the Front PanelChanging the Audio Level Display Turning Power On and OffDisplay Angle Adjustment Audio Mute FunctionBasic Operation Setting the Bass ControlSetting the Treble Control Adjusting the built-in CrossoverExample 1. Listening Position Front Left Seat About the Time CorrectionExample 2. Listening Position All Seats Bass Focus Example of Steps 2 and 3 SettingTime Correction Setting the MX ModeTime Difference Table Radio Operations Manual TuningAutomatic Seek Tuning Manual Storing of Station PresetsTuning to Preset Stations Automatic Memory of Station PresetsReceiving RDS Regional Local Stations Setting RDS Reception Mode and Receiving RDS StationsRecalling Preset RDS Stations RDS OperationsReceiving Traffic Information PTY Programme Type TuningReceiving Traffic Information While Playing CD or Radio When traffic information stations cannot be receivedPriority News Opening and Closing the Movable display CD Player OperationPlayback Repeat Play X. Random PlayMusic Sensor Skip Fast Forward and BackwardSetting Frequency Step Setup OperationAdjusting Source Signal Levels Switching the Tuner ModeDemonstration Setting the AUX ModeCase of Difficulty InformationNo Magzn FM Tuner Section General SpecificationsPrecautions Installation and ConnectionsRemoval Installation24-EN ConnectionTo prevent external noise from entering the audio system Audio Interrupt In Lead Pink/BlackPage Händlerstemple GERÄTE-PASS

CDM-7892R specifications

The Alpine CDM-7892R is a high-performance car audio receiver that exemplifies modern technology and sound quality for audiophiles and casual listeners alike. As part of Alpine's renowned lineup, this model is designed to enhance the in-car listening experience with a blend of innovative features, connectivity options, and superior audio processing capabilities.

One of the standout features of the Alpine CDM-7892R is its ability to support various media formats, allowing users to enjoy their favorite tracks from CDs, MP3s, and even USB drives. The diverse playback options ensure that drivers can have their music library at their fingertips, providing an enjoyable experience on every journey. The front USB port also allows for convenient connection to digital devices, making it easy to play high-quality audio files directly from smartphones or USB flash drives.

A key highlight of the CDM-7892R is its built-in 24-bit DAC (Digital-to-Analog Converter) which significantly enhances audio fidelity. This technology ensures that even lossy audio formats sound smooth and rich, rejuvenating the listening experience with clarity and depth that audiophiles crave. Coupled with an advanced equalizer, users can fine-tune their sound preferences to achieve the perfect audio balance tailored to their taste.

For those who value connectivity, the Alpine CDM-7892R supports Bluetooth technology, enabling hands-free calling and wireless music streaming from compatible devices. This feature not only adds convenience but also promotes safe driving by allowing users to focus on the road while managing calls and playlists effortlessly.

The receiver's sleek, user-friendly interface is another notable characteristic. Featuring a bright, easily readable display, it allows intuitive navigation through the menu options. The ergonomic rotary knob simplifies volume control and track selection, ensuring users can adjust settings without taking their eyes off the road.

In terms of expandability, the CDM-7892R includes preamp outputs for connecting external amplifiers and speakers, providing options for users looking to transform their in-car audio system into a full-fledged sound experience. The model also supports high-fidelity audio systems, enabling enthusiasts to build on their setups for even greater sound performance.

In summary, the Alpine CDM-7892R is a versatile and feature-rich car audio receiver that caters to music lovers' needs. With its support for various media formats, advanced audio technologies, convenient Bluetooth connectivity, and user-friendly interface, it stands out as a top choice for anyone looking to upgrade their car audio system while enjoying high-quality sound wherever the road takes them.
Top Page Image Contents