Alpine CDM-7892R owner manual Handling the Detachable Front Panel

Page 5

Never Attempt the Following

Do not grip or pull out the disc while it is being pulled back into the player by the automatic reloading mechanism.

Do not attempt to insert a disc into the unit when the unit power is off.

Inserting Discs

Your player accepts only one disc at a time for playback. Do not attempt to load more than one disc.

Make sure the label side is facing up when you insert the disc. Your player will automatically eject any disc that is inserted incorrectly. If the player continues to eject a correctly inserted disc, push the Reset switch with a pointed object such as a ballpoint pen.

Playing a disc while driving on a very bumpy road may result in skips, but this will not scratch the disc or damage the player.

New Discs

As a protective measure to prevent the CD from jamming, the CD player will automatically eject discs with irregular surfaces or inserted incorrectly. When a new disc is inserted into the player and ejected after initial loading, using your finger, feel around the inside of the centre hole and outside edge of the disc. If you feel any small bumps or irregularities, this could inhibit proper loading of the disc. To remove the bumps, rub the inside edge of the hole and outside edge of the disc with a ballpoint pen or other such instrument, then insert the disc again.

Centre Hole

Centre Hole

New Disc

Bumps

Outside (Bumps)

Irregular Shaped Discs

Be sure to use round shape discs only for this unit and never use any special shape discs.

Use of special shape discs may cause damage to the mechanism.

Installation Location

Make sure the CDM-7892R will not be installed in a location subjected to:

•Direct sun and heat

•High humidity and water

•Excessive dust

•Excessive vibrations

Handling the Detachable Front Panel

•Do not expose to rain or water.

•Do not drop or apply shock.

Correct Handling

Do not drop the disc while handling. Hold the disc by its edge so that no fingerprints are left on the surface. Do not affix tape, paper, or gummed labels to the disc. Do not write on the disc.

CORRECT

INCORRECT

CORRECT

Disc Cleaning

Fingerprints, dust, or soil on the surface of the disc could cause the CD player to skip. For routine cleaning, wipe the playing surface with a clean, soft cloth from the centre of the disc to the outer edge. If the surface is heavily soiled, dampen a clean, soft cloth in a solution of mild neutral detergent before cleaning the disc.

Disc Accessories

There are various accessories available on the market for protecting the disc surface and improving sound quality. However, most of them will influence the thickness and/or diameter of the disc. Using such accessories can cause the disc to be out of standard specifications and may create operational problems. We recommend not using these accessories on discs played in Alpine CD players.

Transparent Sheet

Disc Stabilizer

3-EN

Page 4 Page 6
Image 5
Page 4 Page 6
Contents CDM-7892R CHA-S634 CHA-1214 CHM-S630Contents Precautions Handling the Detachable Front Panel Detaching the Front Panel Basic OperationsAttaching the Front Panel Initial System Start-UpDisplay Angle Adjustment Turning Power On and OffAudio Mute Function Changing the Audio Level DisplaySetting the Treble Control Setting the Bass ControlAdjusting the built-in Crossover Basic OperationExample 2. Listening Position All Seats About the Time CorrectionExample 1. Listening Position Front Left Seat Bass Focus Example of Steps 2 and 3 SettingTime Difference Table Setting the MX ModeTime Correction Automatic Seek Tuning Manual TuningManual Storing of Station Presets Radio OperationsTuning to Preset Stations Automatic Memory of Station PresetsRecalling Preset RDS Stations Setting RDS Reception Mode and Receiving RDS StationsRDS Operations Receiving RDS Regional Local StationsReceiving Traffic Information PTY Programme Type TuningPriority News When traffic information stations cannot be receivedReceiving Traffic Information While Playing CD or Radio Playback CD Player OperationOpening and Closing the Movable display Music Sensor Skip X. Random PlayFast Forward and Backward Repeat PlayAdjusting Source Signal Levels Setup OperationSwitching the Tuner Mode Setting Frequency StepDemonstration Setting the AUX ModeCase of Difficulty InformationNo Magzn FM Tuner Section General SpecificationsPrecautions Installation and ConnectionsRemoval Installation24-EN ConnectionTo prevent external noise from entering the audio system Audio Interrupt In Lead Pink/BlackPage Händlerstemple GERÄTE-PASS

CDM-7892R specifications

The Alpine CDM-7892R is a high-performance car audio receiver that exemplifies modern technology and sound quality for audiophiles and casual listeners alike. As part of Alpine's renowned lineup, this model is designed to enhance the in-car listening experience with a blend of innovative features, connectivity options, and superior audio processing capabilities.

One of the standout features of the Alpine CDM-7892R is its ability to support various media formats, allowing users to enjoy their favorite tracks from CDs, MP3s, and even USB drives. The diverse playback options ensure that drivers can have their music library at their fingertips, providing an enjoyable experience on every journey. The front USB port also allows for convenient connection to digital devices, making it easy to play high-quality audio files directly from smartphones or USB flash drives.

A key highlight of the CDM-7892R is its built-in 24-bit DAC (Digital-to-Analog Converter) which significantly enhances audio fidelity. This technology ensures that even lossy audio formats sound smooth and rich, rejuvenating the listening experience with clarity and depth that audiophiles crave. Coupled with an advanced equalizer, users can fine-tune their sound preferences to achieve the perfect audio balance tailored to their taste.

For those who value connectivity, the Alpine CDM-7892R supports Bluetooth technology, enabling hands-free calling and wireless music streaming from compatible devices. This feature not only adds convenience but also promotes safe driving by allowing users to focus on the road while managing calls and playlists effortlessly.

The receiver's sleek, user-friendly interface is another notable characteristic. Featuring a bright, easily readable display, it allows intuitive navigation through the menu options. The ergonomic rotary knob simplifies volume control and track selection, ensuring users can adjust settings without taking their eyes off the road.

In terms of expandability, the CDM-7892R includes preamp outputs for connecting external amplifiers and speakers, providing options for users looking to transform their in-car audio system into a full-fledged sound experience. The model also supports high-fidelity audio systems, enabling enthusiasts to build on their setups for even greater sound performance.

In summary, the Alpine CDM-7892R is a versatile and feature-rich car audio receiver that caters to music lovers' needs. With its support for various media formats, advanced audio technologies, convenient Bluetooth connectivity, and user-friendly interface, it stands out as a top choice for anyone looking to upgrade their car audio system while enjoying high-quality sound wherever the road takes them.
Top Page Image Contents