Alpine CDA-9830 Titling Discs/Stations, Erasing Disc Title/Station Title, Displaying Time, 20-EN

About “Title” and “Text”

Title:

With this device, it is possible to input the CD/Station name (this page). This inputted name is referred to as a “title.” You cannot input or display titles on MP3/WMA discs.

Text:

Text compatible CDs contain text information such as the disc name and track name. Such text information is referred to as “text.”

•Some characters may not be displayed correctly with this device, depending on the character type.

•The CD changer must also be CD Text compatible for the Text information to be displayed.

•When the Scroll Setting (page 24) is set to “SCROLL MANUAL,” press and hold TITLE for at least 3 seconds to scroll the Text information only once (TEXT DISPLAY, FOLDER NAME DISPLAY, FILE NAME DISPLAY or TAG DISPLAY mode).

•“NO SUPPORT” (“NO SUPRT” for CDA-9830) is displayed when the desired text information cannot be displayed on this unit.

•If the title was not previously input, “NO TITLE” is displayed.

•The text or tag information may not be correctly displayed, depending on the contents.

Titling Discs/Stations

It is possible to title your favorite CD's or radio stations. You cannot input titles on MP3/WMA discs.

1	Press TITLE and select the Title Display.
	For details, see “Displaying the Title/Text” (page 19).
2	Press and hold TITLE for at least 2 seconds.
	The first character will blink.
3	Turn the Rotary encoder to select the desired
	letter/numeral/symbol available for naming.
4	Press Rotary encoder to store the first character.
	The first character will stop blinking and the display will
	automatically advance to the next character. When that
	character begins to blink, you may choose the next letter
	or symbol of your title.
5	Repeat steps 3 and 4 above to complete the titling.
	Pressing the Rotary encoder after entering the 8th
	character automatically stores the title into memory.
	When entering a title of less than 8 characters (for
	example, 3 character title):
	After entering 3 characters, the 4th character space will
	be blinking. Go to step 6 to complete the title.
6	Press TITLE to record the title.

•If you cancel while entering a title, selected characters are not written.

•You can enter 24 radio station titles and 18 CD titles on this unit. If you try to store beyond the limit, the display will show “FULL DATA.” At this point, no more titles can be stored. To input a new title, one of the previously inputted titles must first be deleted.

•The CD Changer title length or memory capacity varies depending upon the model being used.

•When you want to erase a title, enter the “ ” (“ ” for CDA- 9830) symbol into all spaces.

•The operations described in steps 3 to 5 must be made within 10 seconds. The input mode will be canceled if no action is taken for over 10 seconds.

Erasing Disc Title/Station Title

1 Press TITLE to select the Title Display. Then,

press again and hold for at least 2 seconds.

2 Press and hold -/Jfor at least 2 seconds. The title in the display will blink.

3 Press gor frepeatedly until the title you want to erase is displayed.

4 Press and hold -/Jfor at least 2 seconds to erase the title displayed.

5 Press TITLE to cancel the title erasing mode.

•You cannot erase CD-TEXT.

•"NO DATA" is displayed for 2 seconds if the title is not input in step 2, or if all titles are erased in step 4.

Displaying Time

Press TITLE repeatedly until the time is displayed.

Each press changes the display.

For details, see “Displaying the Title/Text” (page 19).

•Selecting any tuner or CD function while in the clock priority mode will interrupt the time display momentarily. The function selected will be displayed for about 5 seconds before the time returns to the display.

•When the power is off but the ignition key is on, press TITLE to display the time.

Blackout Mode On and Off

When Blackout mode is turned on, the display will turn off to reduce power consumption. This additional power enhances the sound quality.

Press and hold DISP/B.OUT for at least 2 seconds to activate the blackout mode.

The display will turn off.

•If any button on the unit is pressed during the blackout mode, the function will be displayed for 5 seconds to show the operation before returning to Blackout mode.

To cancel Blackout mode, press and hold DISP/B.OUT for at least 2 seconds.

20-EN