Alpine CDA-9831, CDA-9830 owner manual Indication for CD Player, 33-EN

Page 35

CD

CD Player/Changer not functioning.

Out of operating temperature range +50˚C (+120˚F) for CD. - Allow the vehicle's interior (or trunk) temperature to cool.

CD playback sound is wavering.

Moisture condensation in the CD Module.

-Allow enough time for the condensation to evaporate (about 1 hour).

CD insertion not possible.

A CD is already in the CD player.

-Eject the CD and remove it.

The CD is being improperly inserted.

-Make sure the CD is being inserted following instructions in the CD Player Operation section.

Unable to fast forward or backward the CD.

The CD has been damaged.

-Eject the CD and discard it; using a damaged CD in your unit can cause damage to the mechanism.

CD playback sound skips due to vibration.

Improper mounting of the unit.

-Securely re-mount the unit.

The disc is very dirty.

-Clean the disc.

The disc has scratches.

-Change the disc.

The pick-up lens is dirty.

-Do not use a commercial available lens cleaner disc. Consult your nearest ALPINE dealer.

CD playback sound skips without vibration.

The disc is dirty or scratched.

- Clean the disc; damaged disc should be replaced.

Error displays (built-in CD player only)

Mechanical error

-Press c. After the error indication disappears, insert the disc again. If the above-mentioned solution does not solve the problem, consult your nearest ALPINE dealer.

CD-R/CD-RW playback not possible

Close session (finalization) has not been performed. - Perform finalization and attempt playback again.

MP3/WMA

MP3 or WMA is not played back.

Writing error occurred. The CD format is not compatible.

-Make sure the CD has been written in a supported format. Refer to “About MP3/WMA” (page 12-13), then rewrite in the format supported by this device.

Indication for CD Player

HIGH-TEMP

 

HI TEMP

 

 

 

(CDA-9831)(CDA-9830)

Protective circuit is activated due to high temperature.

-The indicator will disappear when the temperature returns to within operation range.

NO DISC

No CD is inserted.

-Insert a CD.

Although a disc is inserted, “NO DISC” is displayed and the unit does not start to play or eject the disc.

-Remove the disc by following these steps:

1)Press the c button.

The movable display will open.

2)Press the c button again for at least 2 seconds while the movable display is open.

ERROR

Mechanism error.

1)Press the c button and eject the CD.

If not ejecting, consult your Alpine dealer.

2)When the error indication remains after ejecting, press the c button again.

If the error indication still does not turn off after pressing the c button for a few times, consult your Alpine dealer.

When “ERROR” is displayed:

If the disc cannot be ejected by pressing c, press the RESET switch (refer to page 6) and press c again.

If the disc still cannot be ejected, consult your Alpine dealer.

PROTECT

A copy-protected WMA file was played back.

- You can only play back non-copy-protected files.

UNSUPPORT UNSUPORT

(CDA-9831)(CDA-9830)

The disc is not written in a MP3/WMA supported format. - Use a disc written at the MP3/WMA supported format.

33-EN

Image 35
Contents CDA-9831 CDA-9830 CHA-1214CHM-S630 CHA-S634Contents Installation and Connections Operating Instructions Product Cleaning Display AlphanumericDisplay Alphanumeric Getting Started Detaching and Attaching the Front Panel Adjusting VolumeLowering Volume Quickly Changing the Display TypeRadio Playback CD / MP3 / WMAFrequency Search Function 10-EN Playing back a Playlist11-EN Press 5 in the play or pause modeRepeat Play X. Random PlayQuick Search Scanning ProgramsSearching from CD Text File/Folder Name Search Concerning MP3/WMA13-EN Terminology14-EN Sound SettingRecalling the Stored built-in Crossover Settings 15-EN Equalizer PresetsAdjusting and Storing the Equalizer Curve Recalling the Stored Equalizer CurveExample 2. Listening Position All Seats About Time CorrectionBass Focus Example 1. Listening Position Front Left Seat17-EN Example setting for steps 4Press Rotary encoder to return to normal mode Adjusting and Storing the Time CorrectionSetting the MX Mode Press BAND/TEL. to select a speaker to be adjusted19-EN About the indicator displayOther Functions Displaying the Title/TextDisplaying Time Blackout Mode On and OffTitling Discs/Stations Erasing Disc Title/Station Title21-EN To set the Bass VolumeDisplaying the External Amplifier Information CDA-9831 only To set the Amplifier22-EN Setting the Multicolor Illumination CDA-9831 onlyVerifying the Software Version If you want to use colors other than the aboveFile name of download data shall be AW*****.MP3 About i-PersonalizeData Downloading 23-EN24-EN Sound CustomizingVisual Customizing 25-EN External DeviceChecking the XM Radio ID Number Storing XM Channel PresetsXM Radio Optional Receiving XM Channels with the XM Receiver OptionalQuick Search Function Setting the Tuning MethodSetting the Auxiliary Data Field Display Channel/Category Search FunctionIncoming Calls Telephone Mode ON/OFFSetting the Automatic Calling About MobileHub LinkCalling by the address book SMS Short Message Service OperationCalling by using the Speed Dial CallingMulti-Changer Selection Optional Changer OptionalControlling CD Changer Optional Playing MP3 Files with the CD Changer Optional31-EN Remote ControlControls on Remote Control Operating the Audio ProcessorBasic Battery ReplacementInformation Case of Difficulty33-EN Indication for CD Player34-EN Indication for XM Radio ModeIndication for CD Changer 35-EN Specifications36-EN Installation and ConnectionsSlide the mounting sleeve into the dashboard Installation37-EN Removal38-EN ConnectionsTo prevent noise/interference in the audio system 39-ENALPINE-1 Limited Warranty

CDA-9831, CDA-9830 specifications

The Alpine CDA-9830 and CDA-9831 are high-performance in-dash car CD players that blend advanced technology with user-friendly features, making them ideal for audiophiles and casual listeners alike. Both models offer a range of functionalities that enhance the listening experience, providing high-quality sound and versatility tailored to modern audio needs.

One of the standout features of the CDA-9830 and CDA-9831 is their superior audio performance. They are equipped with the V-Drive technology that enhances the dynamic range and ensures clean, powerful sound reproduction across all scales. The built-in amplifier delivers impressive wattage, providing sufficient power for even the most demanding speaker systems.

Another key characteristic of these models is their compatibility with various audio formats. Both units support MP3 and WMA playback, allowing users to enjoy their favorite tracks from a variety of digital sources, including CD, USB drives, or auxiliary inputs. The innovative MediaXpander technology further enhances compressed audio files, improving clarity and richness while reducing distortion, thus making digital music sound more like its original analog recording.

The CDA-9830 and CDA-9831 feature a highly intuitive user interface, making navigation through menus and controls effortless. The graphical LCD display is bright and easy to read, ensuring that users can access their music without distraction. Furthermore, the front-panel auxiliary input allows for quick connectivity with external devices, such as smartphones and portable media players, providing convenience for users on the go.

Moreover, these models are equipped with advanced equalizer settings, including a 5-band graphic EQ and a customizable time-alignment feature that allows users to tailor the audio output to their specific preferences and car acoustics. For enthusiasts seeking enhanced control over their sound experience, the ability to fine-tune audio settings provides a significant advantage.

Lastly, both the CDA-9830 and CDA-9831 incorporate Bluetooth technology, which enables hands-free calling and music streaming directly from compatible devices. This not only increases safety by minimizing distractions while driving but also enhances the overall user experience.

In summary, the Alpine CDA-9830 and CDA-9831 are exemplary models in the realm of automotive audio equipment, boasting advanced technologies, exceptional sound quality, and a plethora of features designed to cater to a diverse range of audio needs and preferences. Whether for everyday use or for passionate audio enthusiasts, these CD players are a robust choice for enhancing vehicle sound systems.