Sharp CD-DH790NH Listening to a CD or MP3/WMA disc, Listening to the iPod continued

Listening to the iPod (continued)

■Watching videos on a TV connected to iPod

1Press the DISPLAY (TV OUT) button for more than 2 seconds. “TV DISP” will appear on display.

2Press the ENTER button to start playback.

Notes:

●If the TV Out setting is already turned on at video menu, the video is automatically displayed on the TV screen when ENTER key is pressed.

●To return to watching video on iPod screen, press the MENU button to enter video menu. Then press the DISPLAY (TV OUT) button for more than 2 seconds until “iPodDISP” appears.

●During iPod video playback, pressing the DISPLAY (TV OUT) button will not toggle video out display between iPod and TV.

iPod playback detection function:

Once the play button on the iPod unit is pressed, the main unit will automatically change to iPod function overriding the previous function selected.

Caution:

●Unplug all accessories for the iPod before inserting it into the iPod dock.

●Stop button ( ) at main unit is invalid during iPod function.

■Various iPod functions

Function	Main		Remote		Operation
		unit		control
Play					Press in the pause mode.
Pause					Press in the playback
					mode.
Track up/	____				Press in the playback or
down					pause mode.
					If you press the button in
					the pause mode, press the
					/ button to start the
					desired track.
Fast	____				Press and hold down in the
forward/					playback mode.
reverse					Release the button to
					resume playback.
Display	____				iPod back light ON.
					Press for more than 2
					seconds to toggle the video
					out display between iPod or
					TV.
Repeat	____				Press to toggle repeat
					mode.
Shuffle	____				Press and hold down to
					toggle shuffle mode.
iPod	____				Press to view the iPod
Menu					menu during iPod function.
iPod	____				Press to confirm the
Enter					selection.
iPod	____				Press to select the iPod
Cursor					menu.
Up/Down

Listening to a CD or MP3/WMA disc

MINI COMPONENT SYSTEM

ON/STAND-BY	FUNCTION
	ON/STAND-BY
	VOL

CD

USB

This system can play back a standard CD, CD-R/RW in the CD format and CD-R/RW with MP3 or WMA files, but cannot record on them. Some audio CD-R and CD-RW discs may not be playable due to the state of the disc or the device that was used for recording.

MP3:

MP3 is a form of compression. It is an acronym which stands for MPEG Audio Layer 3. MP3 is a type of audio code which is processed by significant compression from the original audio source with very little loss in sound quality.

●This system supports MPEG 1 Layer 3 and VBR files.

●During VBR file playback, time counter in the display may differ from its actual playback time.

●Bitrate which is supported by MP3 is 32 ~ 320 kbps.

WMA:

WMA files are Advanced System Format files that include audio files which are compressed with Windows Media Audio codec. WMA is developed by Microsoft as an audio format file for Windows Media Player.

●“MP3” and “WMA” indicator will light up after the unit reads information on an MP3 or WMA disc.

●Bitrate which is supported by WMA is 64 ~ 160 kbps.

Auto power on function:

When you press any of the following buttons, the unit turns on.

●CD button on the remote control: The unit turns on and the “CD” function is activated.

● / button on the main unit: The unit turns on and playback of the last function starts (CD, TUNER, AUDIO IN, iPod, USB, TAPE).

Auto power off function:

In the stop mode of CD, MP3 or WMA operation, the main unit enters the stand-by mode after 15 minutes of inactivity.

10