Listening to a CD or MP3/WMA disc continued

Listening to a CD or MP3/WMA disc (continued)

Advanced CD or MP3/WMA disc playback

■Disc playback

1Press the ON/STAND-BY button to turn the power on.

2Press the CD button on the remote control or FUNCTION button repeatedly on the main unit to select CD function.

3Press the OPEN/CLOSE button to open the disc tray.

4Place the disc on the disc tray, label side up.

5Press the OPEN/CLOSE button to close the disc tray.

6Press the / (CD /) button to start playback. After the last track is played, the unit will stop automatically.

Caution:

●Do not place two discs in one disc tray.

●Do not play discs of special shapes (heart, octagon, etc). It may cause malfunctions.

●Do not push the disc tray whilst it is moving.

●If the power fails whilst the tray is open, wait until the power is restored.

●If TV or radio interference occurs during CD operation, move the unit away from the TV or radio.

●Be sure to place 8 cm (3") disc in the middle of the disc tray.

●Due to the structure of the disc information, it takes longer to read an MP3/WMA disc than a normal CD (approximately 20 to 90 seconds).

Notes for CD or MP3/WMA disc:

●When the end of the last track is reached during fast forward, “END” will appear on the display and CD operation will be paused. When the beginning of the first track is reached during fast reverse, the unit will enter the playback mode (only for CD).

●Rewritable multi-session discs with unfinished writing, can still be played.

■Various disc functions

Function

Main

Remote

Operation

unit

control

Play

Press in the stop mode.

Stop

Press in the playback

mode.

Pause

Press in the playback

mode. Press the

button to resume playback

from the paused point.

Track up/

____

Press in the playback or

down

stop mode.

If you press the button in

the stop mode, press the

/ button to start the

desired track.

Fast

____

Press and hold down in

forward/

the playback mode.

reverse

Release the button to

resume playback.

USB

■Direct track search

By using the Direct Search buttons, the desired tracks on the current disc can be played.

Use the Direct Search buttons on the remote control to select the desired track whilst playing the selected disc.

●The Direct Search buttons allow you to select up to number 9.

●When selecting number 10 or higher, use the “10+” button.

A. For example, to choose 13

1	Press the “10+” button once.
2	Press the “1” button.
3	Press the “3” button.	Selected track number

B. For example, to choose 130

1Press the “10+” button twice.

2Press the “1” button.

3Press the “3” button.

4Press the “0” button.

Notes:

●A track number higher than the number of tracks on the disc cannot be selected.

●During random play, direct search is not possible.

To stop playback:

Press the (CD ) button.

■Repeat play

Repeat play can play one track, all tracks or a programmed sequence continuously.

To repeat one track:

Press the PLAY MODE button repeatedly until “1-REPEAT” appears. Press the / (CD /) button.

To repeat all tracks:

Press the PLAY MODE button repeatedly until “ALL REPEAT” appears. Press the / (CD /) button.

To repeat desired tracks:

Perform steps 1 - 5 in “Programmed play” section on page 12 and then press the PLAY MODE button repeatedly until “ALL REPEAT” appears.

To cancel repeat play:

Press the PLAY MODE button repeatedly until “NORMAL” appears and “ ” disappears.