Sony CDX-GT290 Other functions Changing the sound settings, Adjusting setup items SET, EQ3

Car audio and car goods internet store Winauto

Other functions

Changing the sound settings

Adjusting the sound characteristics — BAL/FAD/SUB

You can adjust the balance, fader, and subwoofer volume.

1Press the select button repeatedly until “BAL,” “FAD” or “SUB” appears.

The item changes as follows:

Adjusting setup items — SET

1Press and hold the select button.

The setup display appears.

2Press the select button repeatedly until the desired item appears.

3Rotate the control dial to select the setting (example “ON” or “OFF”).

4Press and hold the select button.

The setup is complete and the display returns to normal reception/play mode.

Note

LOW*1 T MID*1 T HI*1 T		Displayed items will differ, depending on the source
BAL (left-right) T FAD (front-rear) T		and setting.
SUB (subwoofer volume)*2 T AUX*3		The following items can be set (follow the page
*1 When EQ3 is activated (page 10).		reference for details):
*2 When the audio output is set to “SUB-OUT”
(page 10).
		CLOCK-ADJ(Clock Adjust) (page 4)
“ATT” is displayed at the lowest setting, and can
be adjusted up to 21 steps.		CT (Clock Time)
*3 When AUX source is activated (page 11).		Activates the CT function: “ON,” “OFF”
2 Rotate the control dial to adjust the		(page 8, 9).
	winauto
selected item.		BEEP
After 5 seconds, the setting is complete and		Activates the beep sound: “ON,” “OFF.”
the display returns to normal reception/play
		AUX-A*1(AUX Audio)
mode.		Activates the AUX source display: “ON,”
		“OFF” (page 11).
Customizing the equalizer c rve
		A.OFF (Auto Off)
— EQ3		Shuts off automatically after a desired time
“CUSTOM” of EQ3 allows you to m ke your		when the unit is turned off: “NO,” “30S
		(Seconds),” “30M (Minutes),” “60M (Minutes).”
own equalizer settings.
1 Select a source, then press (EQ3)		SUB/REAR*1
		Switches the audio output: “SUB-OUT”
repeatedly to select “CUSTOM.”
		(subwoofer), “REAR-OUT” (power amplifier).
2 Press the select button repeatedly
		B.OUT (Black Out)
until “LOW,” “MID” or “HI” appears.		Turns off the illumination automatically for any
3 Rotate the control dial adjust the		source (e.g., during radio/CD playback
selected item.		reception, etc.) if no operation is performed for
The volume level is adjustable in 1 dB steps,		5 seconds: “ON,” “OFF.”

from –10 dB to +10 dB.	To bring the light back on, press any button on
	the unit. (When activated, remote operation is
	unavailable.)

Repeat steps 2 and 3 to adjust the equalizer curve.

To restore the factory-set equalizer curve, press and hold the select button before the setting is complete.

After 5 seconds, the setting is complete and the display returns to normal reception/play mode.

Tip

Other equalizer types are also adjustable.

DEMO (Demonstration)

Activates the demonstration: “ON,” “OFF.”

DIM (Dimmer)

Changes the display brightness: “ON,” “OFF.”

M.DSPL (Motion Display)

–“ON”: to show moving patterns.

–“OFF”: to deactivate the Motion Display.

A.SCRL (Auto Scroll)

Scrolls long items automatically: “ON,” “OFF.”

10