Car audio and car goods internet store Winauto
Radio
Storing and receiving stations
Caution
When tuning in stations while driving, use Best Tuning Memory (BTM) to prevent an accident.
RDS
Overview
FM stations with Radio Data System (RDS) service send inaudible digital information along with the regular radio program signal.
Storing automatically — BTM
1Press (SOURCE/OFF) repeatedly until “TUNER” appears.
To change the band, press (MODE) repeatedly. You can select from FM1, FM2, FM3, MW, SW1 or SW2.
Display items
Program service name, Clock, Frequency*, Preset number
2 Press and hold the select button. |
| * While receiving the RDS station, “ *” is displayed on | ||
| the left of the frequency indication. | |||
The setup display appears. |
| |||
|
|
| ||
3 Press the select button repeatedly |
| To change displ y items, press (DSPL/SCRL). | ||
|
|
| ||
until “BTM” appears. |
| RDS services | ||
4 Press (SEEK) +. |
| |||
| This nit tomatically provides RDS services as | |||
The unit stores stations in order of frequency |
| |||
| follows: | |||
on the number buttons. |
| |||
|
|
| ||
A beep sounds when the setting is stored. |
| PTY (Program Types) | ||
|
|
|
| ua |
|
|
| Displays the currently received program type. | |
Storing manually |
| Also searches your selected program type. | ||
|
|
| ||
| CT (Clock Time) | |||
1 While receiving the station that you |
| |||
| The CT data from the RDS transmission sets | |||
want to store, press and hold |
| the clock. | ||
number button ((1) to (6)) until |
|
|
| |
| Notes |
| ||
“MEMORY” appears. |
|
| ||
| • Depending on the country/region, not all RDS | |||
|
|
| ||
Note |
|
| functions may be available. | |
If you try to store another stat on on the same number |
| • RDS will not work if the signal strength is too weak, | ||
button, the previously stored stat on w ll be replaced. |
| or if the station you are tuned to is not transmitting | ||
|
|
| RDS data. | |
|
|
|
| |
Receiving the stored stations |
|
|
| |
| Selecting PTY | |||
1 Select the band, then press number |
| |||
| 1 Press (PTY) during FM reception. | |||
button ((1) to (6)). |
| |||
| winauto |
| ||
|
|
|
|
|
Tuning automatically
1Select the band, then press (SEEK) +/– to search for the station.
Scanning stops when the unit receives a station. Repeat this procedure until the desired station is received.
Tip
If you know the frequency of the station you want to listen to, press and hold (SEEK) +/– to locate the approximate frequency, then press (SEEK) +/– repeatedly to fine adjust to the desired frequency (manual tuning).
The current program type name appears if the station is transmitting PTY data.
2Press (PTY) repeatedly until the desired program type appears.
3Press (SEEK) +/–.
The unit starts to search for a station broadcasting the selected program type.
8