S e t u p y o u r p h o n e
1.With the back of the phone facing you, push down on the back cover release button.
2.Slide the back cover toward the bottom of the phone and remove.
Insert the UIM card into the holder (beveled corner last) with the gold- coloured contacts facing down, matching up with the
Remove the battery
After you have removed the back cover, insert your finger into the finger grip, and lift the battery from its compartment.
Install the UIM card
The user identity module (UIM), also called the CDMA subscriber identity module (SIM), card and its contacts can be easily damaged by scratches or bending, so be careful when handling, inserting, or removing the card.
Before installing the UIM card, always make sure that the phone is switched off and that you have removed the cover and battery.
Keep all UIM cards out of the reach of small children.
Replace the battery
1.Position the battery so the positive and negative indicators on the battery match up with the positive and negative indicators on the phone.
The battery label should be facing away from the phone.
2.Insert the battery,
3.Push down on the other end of the battery to snap the battery into place.
16 | Copyright © 2004 Nokia. All rights reserved. |