4.Press the End key to return to the start screen; then enter the phone number, including any prefix (such as 0 or 1) that your calling card may require when you make a calling card call.
See your calling card for instructions.
5.Press and hold the Talk key for a few seconds until Card call is displayed.
6.When you hear the tone or system message, press OK.
Receive data or fax calls
Data or fax calls is a network service. See “Network services”, 9 for more information.
If your wireless service provider supports this feature, you can set up the phone to send or receive data or fax calls when a terminal, such as a PDA or PC, is connected.
For better performance during data calls, place the phone on a stationary surface with the keypad facing downward. Do not move the phone by holding it in your hand during a data call.
Note: For more information on connectivity, refer to the PC/PDA Connectivity Guide. The PC/PDA Connectivity Guide can be downloaded from the Nokia website at
S e t t i n g s ( M e n u 4 )
1.In the standby mode, select Menu > Settings > Call settings > Data/ fax calls > Incoming data/fax call.
2.Select one of the following options:
Normal—The phone receives incoming calls as usual.
Data calls
Fax calls
3.When you are finished receiving the fax or data call, repeat Steps 1 and 2 and select Normal.
Data transfer
You can view the transmission speed when sending or receiving data or fax calls.
In the standby mode, select Menu > Settings > Call settings > Data/fax calls > Data rate display > Graphic or Off.
Call summary
Your phone can display the time spent on a call when you hang up.
In the standby mode, select Menu > Settings > Call settings > Call summary > On or Off.
Copyright © 2004 Nokia. All rights reserved. | 47 |