Nokia 6610 Error messages, Remedy, ∙ Check the phone’s signal level ∙ Restart a session

Page 14

Error messages

Error messages can be a big frustration if the cause is unknown. SenwesMobile, as any system, is not free of such behaviour. Although everything possible is done to limit these problems, errors will occur. These messages can be caused by either a system problem or an action incorrectly executed.

Here are some samples of messages you might encounter.

------ Service reply------

Service temporarily unavailable

Back

or

------ Service reply------

Application not running

Back

------ Service reply------

Not Done

Back

------ Service reply------

02-04 16:07 old data! last wm FEB3: 1200 –107

Answer Back

This message is generated when the service you are trying to access is unavailable due to one of the following problems-

Mobile network.

Data network.

Application server.

Incorrect access number supplied.

Weak network coverage (signal).

Remedy:

Make sure you have entered the correct number.

Check the phone’s signal level.

If you are using short dial make sure the number is still correct or in existence.

Keep on trying at regular intervals.

This message is usually generated during normal use and is caused by the following -

Communication loss with mobile network.

Weak network coverage (signal).

Remedy:

Check the phone’s signal level.

Restart a session.

The message old data! appears on a normal screen when data is older than 10 minutes. This is informative and an indication that the data is old and not to be relied on. This is caused by a loss of data feed.

SenwesMobile – Users’ Manual v1.4

Page 14 of 15

Image 14
Contents SenwesMobile How to use this manual Pressing a button on the phone AnswerEnter your number What is my next step?How do I navigate between menus? After closure the last bidding price∙ 8. Set Trigger ∙ 9. View Triggers ∙ 0. exit Exchange rate menu How do I navigate quickly between menus?Take you directly to Exchange rateMain Menu Navigation from the main menuWhat are Triggers and how do I use them? Answer * and Send willValue. Press Answer to System will prompt youWith the next set of menus Navigate to the next menuAnswer 09 and Send Trigger Summary How can I view a summary of my triggers?View triggers through Internet Triggers can be manipulated via the InternetAny one of the options 1 to 11 can be saved as startup menu How do I leave the system quit?Can I customise the system to my own needs? Exchange rate trigger How will the system respond to a trigger alert?Enter 1 and press Send Commodity trigger Minimum Few SMS trigger samplesExchange rate trigger minimum Commodity trigger Maximum GrainStock GrainStockImport and Export parity Answer * and Send will take you to the main menu Navigation from the main menu to GrainStockImport and Export parity Answer 11 and Send will take you direct to the Silo screenRemedy Error messages∙ Check the phone’s signal level ∙ Restart a session ∙ Restart a session ∙ Check the phone’s signal level