Application timeout
Back
Application timeout message is caused by the following-
∙Application unable to handle your request.
∙Slow Mobile network traffic.
∙Problem with application.
Remedy:
∙Restart a session.
∙Check the phone’s signal level.
Unknown
Application
Back
Requesting
Cancel
Unknown Application message is caused by the following-
∙Incorrect service number used.
Remedy:
∙MTN *198*2*736937#
∙Vodacom - *120*736937#
When a session is started it keeps displaying Requesting.
The problem is normally caused by-
∙Weak network coverage (signal).
Remedy:
∙Restart a session.
∙Check the phone’s signal level.
CAUTION
A weak signal can cause various problems. Before accessing the system, ensure that you have a strong signal by observing the signal level indicator of your phone. A lot of uncertainty and unwanted problems can be avoided if you
implement this strategy.
Disclaimer:
FMG is not responsible for the data displayed.
This manual must be treated as reference. Menu appearances and layout will differ from
phone to phone. The layout in this manual was based on a Nokia 6610.
Application features and enhancements may change menus without any notice. The latest manuals will always be available on the following websites-
http://www.flashmedia.co.za
http://www.senwes.co.za/senwesmobile/
SenwesMobile – Users’ Manual v1.4 | Page 15 of 15 |