Nokia CK-100 manual Installation, Safety information

Page 17

I n s t a l l a t i o n

5. Installation

Safety information

Observe the following safety guidelines when installing the car kit:

Only a qualified service technician should install or service the car kit using the approved original Nokia parts supplied in the sales package. Faulty installation or service may be dangerous and may invalidate any warranty which may apply to the car kit.

End users should remember that the car kit comprises complex technical equipment that requires professional installation using special tools and expert know-how.

Instructions given in this guide are general guidelines that apply to the installation of the car kit in an automobile. However, due to the wide variety of car types and models available on the market, this guide cannot consider the individual technical requirements relevant to any particular vehicle. Contact the vehicle manufacturer for detailed information about the vehicle in question.

The car kit is suitable for use only in vehicles with 12-V, negative grounding. Use on other supply voltages or alternative polarity will damage the equipment.

Remember that modern automotive systems include onboard computers where key vehicle parameters are stored. Improper disconnection of the car battery may cause loss of data, necessitating extensive effort for reinitialisation of the system. If you have any concerns, contact your car dealer before any installation work is done.

Do not wire the car kit equipment to the high-voltage lines of the ignition system.

When installing the parts of the car kit, ensure that none of them interfere with or hinder the steering or braking systems or other controls or systems used in the operation of the vehicle (for example, airbags) or disturb your field of vision while driving. Ensure that the

17

Image 17
Contents Nokia Car Kit CK-100 User and Installation Guide 0434 Contents For your safety Introduction Bluetooth wireless technologyParts Getting startedSwitch on Switch the car kit on or offSwitch off Input devicePair and connect the car kit Pair and connect with another deviceConnect the car kit manually to a phone Connect the car kit automaticallyClear the list of paired devices Connect two A2DP devices at the same timeDisconnect the car kit Make a call OperationAnswer a call End a callManage two calls at the same time Adjust volumeListen to music Car radio muteReset Audio issues TroubleshootingConnection issues Car kit does not play sound in stereo Car kit does not switch on when I turn on the car ignition Other issuesSafety information InstallationIntegration with a car radio system Use the car kit amplifier for calls and music Use the ISO cable CA-135 or CA-152Installation CA-135/CA-152 Cut the loop indicated with scissors in the figure Use the power cable PCU-4 or CA-153PPCU-4/CA-153P SP-3 Install the car kit in a vehicle Hands-free unit HF-22 Microphone MP-2 Input device CU-11ISO cables CA-135 and CA-152 Charging cable CA-134Check the operation of the car kit Optional accessoriesMobile holder External antennaCare and maintenance Vehicles Additional safety information