I n s t a l l a t i o n
•Unplug the appropriate cables from the car radio, and insert the ISO cable plug instead. Connect the open ends of the cables to the car radio speakers.
•Connect one of the wires labelled Mute 1, Mute 2, or Mute 3 on the car radio to the ISO cable. Leave the other mute wires connected as they are.
•Insert the power cable plug of the ISO cable to the respective connector on the
•Check the
2.Plug the ISO cable to the respective connector on the
After you have connected the ISO cable, connect the external input device
To charge a compatible Nokia mobile phone through the car kit, connect one end of the supplied charging cable
Use the car kit amplifier for calls and the car radio amplifier for music
In this setup, the car radio is muted when you make or receive a call.
The amplifier and equaliser of your car radio are used for music played on a connected device that supports the A2DP profile. The
Music played on A2DP devices and Nokia Maps navigation prompts played on some Nokia device models are directed to the AUX input of the car radio. To hear the music and prompts, select AUX input on your car radio as the audio source. If the car radio does not have an AUX
20