I n s t a l l a t i o n
through the radio; in that case, install the car kit using the ISO cable CA- 135 or CA-152.
PCU-4/CA-153P
SP-3
1.Connect the respective wires of the power cable PCU-4 or CA-153P to the car battery and ignition sense (if available). Connect the car radio mute wire (if available) to the car radio.
2.Plug the power cable to the respective connector on the hands-free unit.
3.Connect the loudspeaker SP-3 to the respective connector on the hands-free unit.
4.Connect the stereo outputs of the hands-free unit to the AUX input of the car radio. Use an appropriate cable specific to your car radio (this cable is not supplied with the car kit).
After you have made all the connections, connect the external input device CU-11 and the microphone MP-2 to the respective connectors on the hands-free unit.
To charge a compatible Nokia mobile phone through the car kit, connect one end of the charging cable CA-134 to the hands-free unit and the other end to the 2.0-mm (0.08 inch) charging connector of the mobile phone.