For more information on the use of “pause” and “wait” characters, see “Automatically Sending Touch Tones” on page 40.
Notes about Storing Numbers
REPLACE NAME?
This appears if the name is already in use. The phone displays the number (in the upper right hand corner) of the location where it is stored. To replace the information
already stored, press 
.
STORE TO?
This appears if there is no empty location available. Enter the memory location where you want to store the information (existing content will be overwritten). Enter a
location number and press 
.
REPLACE CONTENT?
This prompts you to replace the contents of the selected
location. To replace the information, press 
.
ALREADY STORED
This appears if both the phone number and name are already stored. The phone prompts you to move the information to the first empty memory location (e.g., MOVE
TO 5?). Press 
, or enter a different location
number then press 
.
Press 
if STORE, REPLACE or MOVE appears and you do not want to continue.
The phone exits the store function, and the information you tried to store reappears on the display. You can re- attempt to store the information in the phone directory memory as described above, or you can clear the display
by pressing and holding 
.
To Change the Number Stored with a Name
1)Recall the number from memory.
2)Use the 
key to erase the current number one digit at a time, then key in the new number.
19