To enable the compass and try to find your current position, press the Navigator key. If the circle around the compass is red,
the compass is not calibrated. To calibrate the compass, rotate the device around all axes with your wrist in a continuous movement until the circle is green. When you rotate the device, make sure that the device display momentarily faces toward the ground.
If the circle is yellow, the calibration accuracy is low, and you should continue rotating the device. When the compass is enabled and the circle around the compass is green, the map view turns automatically according to which direction the top of the device is pointing.
To enable or disable the compass, select Options > Tools > Turn compass on or Turn compass off. When the compass is not in use, the circle around the compass is white and the map view does not turn automatically.
P o s i t i o n i n g
Find locations
To find a location in the city or area displayed on the map, enter the full or partial address of the location in the search field, and select Search. To find a location in another city, enter the city and the full or partial address, and select Search. If possible, write the name of city in the local language or English. If you are unsure of the address, enter the only first three characters of the address. To find a city in a different country, enter the full name of the country in English or the
To find a specific address, select Options > Search > Addresses. Country/Region * and City or post code are mandatory.
To browse through or search for places and attractions in your area, select Options > Search > Places and a category. For example, to find a hotel, select Options > Search > Places > Accommodation. To find a hotel by its name, enter the name, and select Search, or to browse the hotels, select a category or Search all.
To find an address saved in Contacts, select Options > Search > Addresses > Options > Select from Contacts.
Copyright © 2008 Nokia. All rights reserved. | 33 |